ChinaDroneRequest a quote →
STEAM FLYDRAGONpro FD005-6 gray MPU6000 helicopter flight controller with dual antennasSTEAM FLYDRAGONpro FD005-6 gray MPU6000 helicopter flight controller with dual antennas

STEAM FLYDRAGONpro FD005-6

The STEAM FLYDRAGONpro FD005-6 is a helicopter flight controller with open-source Rotorflight firmware, four flight modes and a built-in ELRS dual-antenna 2.4G receiver. Its 45x27x14.5mm, 27g hardware integrates an STM32F722RET6 processor, barometer, 128MB black box memory, servo connections and ESC telemetry support.

XinyueDrone flight controller
Weight
27 g
Dimensions
45x27x14.5 mm

Get a free quote

Product overview

The STEAM FLYDRAGONpro FD005-6 is a helicopter flight controller running open-source Rotorflight firmware based on Betaflight 4.5. It provides self-leveling, semi-self-leveling, 3D and rescue modes. Its hardware combines an STM32F722RET6 processor, MPU-6000 / ICM-42688-P gyroscope specification, SPL06-001 barometer and 128MB W25N01G black box memory. An ELRS dual-antenna 2.4G receiver is built in on serial port 1. The controller measures 45x27x14.5mm and weighs 27g, with a WS2812B LED and a 5V active buzzer.

Connections include Type-C USB, UART2, UART3, UART5, I2C1, an RPM input and an AUX channel, alongside CH1-CH2-CH3-TAIL servo channels. BEC voltage is 5-18V, and the 5V power output is rated at 2A. Voltage measurement ranges are 0-62V for ADC_BATT, 0-30V for ADC_BEC and 0-8V for ADC_BUS. External receiver support spans the listed serial and CPPM protocols, while ESC control includes PWM, DSHOT and other supported protocols. Factory firmware is RF2 v2.1.1 for the controller and v3.5.3 for the receiver.

Flight control & navigation

Specifications

STEAM FLYDRAGONpro FD005-6 specifications
SpecificationValue & conditions
ModelFD005-6
Firmware platformOpen-source Rotorflight, based on Betaflight 4.5
Flight modesSelf-leveling, semi-self-leveling, 3D and rescue
Main processorSTM32F722RET6
GyroscopeMPU-6000 / ICM-42688-P
Black box memoryW25N01G (128MB)
BarometerSPL06-001 (I2C2)
LEDWS2812B
Buzzer5V active buzzer
USB connectorType-C
Serial portsUART2, UART3, UART5
I2C interfaceI2C1
ADC measurement ranges
  • ADC_BATT: 0-62V;
  • ADC_BEC: 0-30V;
  • ADC_BUS: 0-8V
Servo channelsCH1-CH2-CH3-TAIL
Speed inputRPM
Auxiliary channelAUX
Built-in receiverELRS dual-antenna 2.4G receiver on serial port 1
External receiver protocolsTBS CRSF, Futaba S.BUS, Futaba S.BUS2, FrSky F.PORT, FrSky F.PORT2, FrSky FBUS, Spektrum DSM/1024, Spektrum DSM/2048, Spektrum DSMSRXL, Spektrum DSMSRXL2, ImmersionRC GHOST, Graupner SUMD, Graupner SUMH, Flysky IBUS, JR XBUS Mode A, JR XBUS Mode B, JR XBUSIRJ01, Jeti EXBUS, CPPM
BEC voltage5-18V
5V power output5V-2A
ESC protocolsPWM, ONESHOT125, ONESHOT42, MULTISHOT, BRUSHED, DSHOT150, DSHOT300, DSHOT600, PROSHOT, CASTLE
Supported ESC telemetryBLHeli32, Hobbywing Platinum V4 / FlyFun V5, Hobbywing Platinum V5, Scorpion, Kontronik, OMPHobby, ZTW, APD, OpenYGE, FLYROTOR, Graupner, XDFLY
Dimensions45x27x14.5mm
Weight27g
Controller and receiver firmware versionsMain controller: RF2 v2.1.1; receiver: v3.5.3Factory-installed firmware.

Related guides