ChinaDrone.Request a quote ↗
COMPONENT

Xingkai XK-H10

By Xingkai ↗

The Xingkai XK-H10 is an integrated RC video controller for drone and payload operation, route planning and live monitoring. It combines Android-based ground station software, physical flight controls and a 10.1-inch anti-glare touchscreen, with radio/video transmission, external connections, tripod mounting and a lithium battery rated for six hours at full power.

Product typeXK-H10 FPV RC video controller
ProcessorSix-core Rockchip RK3399
Operating systemAndroid 8.1
Control and display functionsRemote control of drones and payloads, route planning, drone status and real-time image displayBuilt-in ground station control software.
Battery typeHigh energy density lithium battery
Operating duration6 hoursAt full power.

Product overview

The Xingkai XK-H10 combines physical flight controls, a touchscreen and built-in ground station software in an RC video controller. Its six-core Rockchip RK3399 processor runs Android 8.1, supporting drone and payload control, route planning, aircraft status viewing and live imagery. The control layout includes left and right flight rockers, a thumb rocker, six three-position switches, two knobs and additional keys. A handle and ring hook provide handling provisions, while an upper-side 1/4 screw hole allows the controller to be fixed to a tripod.

The 10.1-inch anti-glare industrial touchscreen has a stated brightness of 1000CD/m2 for sunlight viewing. Image transmission supports 800M, 1.4G and 2.4G, with a stated maximum distance of 22KM, 1080P video and delay as low as 200ms. The lithium battery provides six hours of operation at full power. Integration connections include Type C, USB, HDMI output, an earphone jack and SIM and TF card slots. Charging uses a DC port and standard adapter. The cooling outlet must remain clear, and the software displays a low-voltage alarm below 10% remaining power.

Specifications

SpecificationValue & conditions
Product typeXK-H10 FPV RC video controller
ProcessorSix-core Rockchip RK3399
Operating systemAndroid 8.1
Control and display functionsRemote control of drones and payloads, route planning, drone status and real-time image displayBuilt-in ground station control software.
Battery typeHigh energy density lithium battery
Operating duration6 hoursAt full power.
Display10.1-inch anti-glare AG industrial touchscreen, sunlight-viewable
Display brightness1000CD/m2
Supported frequencies800M, 1.4G, 2.4GImage transmission.
Transmission distanceUp to 22KMImage transmission; farthest stated distance.
Video resolution1080PVideo transmission.
Transmission delayAs low as 200msVideo transmission; lowest stated delay.
Antenna functionRadio/video data transmission
Flight and thumb controlsLeft flight rocker, right flight rocker and thumb rocker
Switches and knobsSix three-position switches S1–S6 and knobs T3 and T4
Keys and power controlKeys S13 and S14; tap keys S7+, S7-, S9, S15, S8+, S8-, S10 and S16; power-on button
Handling featuresRing hook and handle
Type-C connectionType C
Status indicatorsFour front power indicator lamps and three rear link signal strength indicators
Battery indicator levelsApproximately 100%, 75%, 50% and 25%Approximate remaining battery capacity.
Battery percentage displayExact remaining power percentageGround station software interface.
Low-voltage alarmLow-voltage alarm displayed in the ground station software interfacePower percentage less than 10%.
Cooling outletLower-side fan heat outletFan outlet must remain unobstructed.
Charging connectionDC charging portCharging through standard adapter.
Rear connections and card slotsEarphone jack, HDMI output, SIM card slot, TF card slot and USB
Mounting provisionUpper-side 1/4 screw holeFor fixing to a tripod.

Ask for the Xingkai XK-H10 price ↑

KEEP EXPLORING

Similar products

Browse all products ↗
RadioLink ER16 receiver circuit board with two antenna connectors
Links & controllers

ER16

By RadioLink Electronic Limited

The RadioLink ER16 is a 16-channel ExpressLRS 2.4G receiver for compact FPV, racing and autonomous aircraft installations. It combines dual IPEX MHF 1 antennas, 20 × 12 mm dimensions, 1.2 g weight and a 4–9 V input. It comes pre-flashed with V3.3 firmware and supports Betaflight, APM and Wi-Fi firmware updates.

Links & controllers

MALUS CB15

By Bytech Technology Co., Ltd.

The Bytech Technology Co., Ltd. MALUS CB15 is a ground control console for remote unmanned equipment. Three joysticks, 54 buttons and a colour display provide access to aircraft, gimbal, dock and payload functions through a management platform. It supports Windows, wired operation with charging, and wireless control up to 30m.

RadioLink RC4GS V3 instruction manual cover showing a handheld transmitter with an orange steering wheel
Links & controllers

RadioLink RC4GS V3

By RadioLink Electronic Limited

The RadioLink RC4GS V3 is a five-channel surface radio transmitter for cars, boats, lifebuoys and tracked robots. It combines programmable mixing, 30-model memory and receiver-dependent voltage telemetry. Its standard R6FG receiver integrates a gyro and supports high-voltage servos; transmitter power options include AA, LiPo and 18650 lithium batteries.

DJI Lightbridge 2 controller and air unit with antennas and cables
Links & controllers

DJI Lightbridge 2

By DJI

DJI Lightbridge 2 is an HD video transmission system with an air unit and a battery-powered ground unit incorporating remote-control functions. It accepts AV and HDMI video inputs and provides HDMI, SDI and USB outputs. Maximum communication distance is 5000 m in FCC mode or 3500 m in CE mode without interference or obstructions.