ChinaDroneRequest a quote →

Wuwei WFG120A

The Wuwei WFG120A is a UAV flight controller for engineering applications and batch deployment. It combines an STM32H743VIT6 processor, redundant dual IMUs, onboard navigation sensors and analog OSD with ten ESC/servo outputs, 3S–8S power input and compatibility with four open-source flight-control firmware platforms.

WuweiDrone flight controller

Get a free quote

Product overview

The Wuwei WFG120A UAV flight controller is designed for engineering applications and batch deployment. Its STM32H743VIT6 processor runs at 480MHz with 2MB Flash, supported by a redundant dual-IMU architecture. The board integrates an SPA06 barometer, QMC5883P magnetic compass and AT7456E analog OSD chip. Power input spans 3S–8S, while two onboard automotive-grade BEC supplies provide 5V@3A and 12V@3A outputs. A reserved SPI interface allows additional high-precision sensors, including barometers, IMUs and magnetic compasses, to be added to the flight-control platform.

Ten ESC/servo signal outputs are divided between a 4-in-1 ESC direct-connect interface and an expansion interface. Connectivity includes eight serial ports, one CAN port, one independent IIC port and four reserved IO pins. Analog camera and video transmission interfaces accompany an HD interface supporting direct connection of DJI O3/O4 systems. STLINK debugging, buzzer and LED strip interfaces are supported, along with TF-card black-box recording. Compatibility with ArduPilot, PX4, Betaflight and INAV, plus modifiable open-source firmware, supports integration with onboard computing boards, visual guidance modules and ground-station systems.

Flight control & navigation

Specifications

Wuwei WFG120A specifications
SpecificationValue & conditions
Main processorSTM32H743VIT6, 480MHz, 2MB Flash
Accelerometer and gyroscopeTwo domestically produced IMUs; supports adaptation for ICM-42688-P, ICM-42605 and BMI270Default configuration: two domestically produced IMUs.
Onboard barometerSPA06
Onboard magnetic compassQMC5883P
Onboard OSD chipAT7456E
ESC/servo signal outputs10 channels total (MOTO1–MOTO10)
4-in-1 ESC direct-connect interface1; integrates battery-positive input BAT, power GND, MOTO1–MOTO4, current sensing and serial RX
ESC/servo expansion interface1; integrates battery-positive input, GND and MOTO5–MOTO10
Reserved IO pins4 (PIN_IO1–PIN_IO4)
Serial ports8
CAN port1
Independent IIC port1
Analog camera interface1
Analog video transmission interface1
HD video transmission interface1; supports direct connection of DJI O3/O4 HD video transmission systems
Onboard BEC outputsTwo outputs: 5V@3A and 12V@3A; automotive-grade power supplies
VBAT power input range3S–8S
STLINK debugging interfaceSupported
Buzzer interfaceSupported
LED strip interfaceSupported
Black-box data recordingSupports recording to a TF card
IMU architectureDual-IMU redundant design
SPI sensor expansionReserved SPI interface supports additional high-precision SPI peripheral sensors, including barometers, IMUs and magnetic compasses
Compatible flight-control firmwareArduPilot, PX4, Betaflight and INAV
Firmware customizationOpen-source code allows users to modify and compile firmware to suit their requirements
Product type and applicationWFG120A UAV flight controller designed for industrial deployment and batch product deployment
System integrationSupports integration with onboard computing boards, visual guidance modules and ground-station systems

Related guides