| Product identity and construction | AnyMESH ANYMESH-BWL-2W integrated backpack MIMO mesh radio. |
|---|
| Applications and transmission | Point-to-point or point-to-multipoint bidirectional wireless video, voice and data transmission for applications including firefighting and rescue, emergency vehicle communications, unmanned surface vessels and specialized robots. |
|---|
| Carrying equipment and installation | An accompanying tactical vest supports backpack or vehicle use.With the accompanying tactical vest. |
|---|
| Mobile networking | Maintains connections and forms mesh networks with moving and stationary nodes.During high-speed movement on land, water or in the air. |
|---|
| Terminal connectivity and web management | Ethernet, serial and voice interfaces connect terminals including handheld microphones and sensors. A web platform supports device and network configuration and displays connection status through a network topology diagram. |
|---|
| Communication frequency | 1415–1465 MHz, adjustable in 5 MHz steps.L band. |
|---|
| Transmit power | 33 dBm (2 W), adjustable in 1 dBm steps.L band. |
|---|
| Bandwidth modes | 5 / 10 / 20 / 40 MHz; other bandwidth modes can be customized. |
|---|
| Communication waveform | COFDM + MIMO + CSMA/CA. |
|---|
| Carrier modulation | BPSK/QPSK/16QAM/64QAM.Adaptive modulation. |
|---|
| Receiver sensitivity | -98 dBm.At 5 MHz bandwidth. |
|---|
| Transmission latency | Approximately 2 ms.Single hop. |
|---|
| Multi-hop capability | - Short messages: up to 15 hops;
- voice: up to 10 hops;
- video: 8 or more hops.
Short-message, voice and video traffic respectively. |
|---|
| Supported movement speed | 300+ km/h. |
|---|
| Network joining time | Less than 1 second. |
|---|
| Data interfaces | 1 Ethernet port, 1 RS232 port and a 3.5 mm audio interface. |
|---|
| Spectrum sensing | Spectrum scanning and interference indication. |
|---|
| Voice communication | IP voice conferencing / PTT intercom.Software selected as required. |
|---|
| Network expansion | Wi-Fi AP, USB connection for an external 4G modem, and integration with public and satellite networks.External 4G modem connected through USB for 4G access. |
|---|
| Encryption | AES128 and AES256. |
|---|
| Power supply | 16.8 V / 2 A.Battery power. |
|---|
| Power consumption | 6–18 W overall; standby 6 W; receiving 8 W; full-load transmission 18 W.Standby, receiving and full-load transmission as specified. |
|---|
| Operating time | 6–8 hours.With removable battery. |
|---|
| Ingress protection | IP65. |
|---|
| Temperature range | -40 to +65 °C.Operating temperature. |
|---|
| Dimensions | 150 × 215 × 45 mm. |
|---|
| Network size | 32 nodes.Single-frequency operation. |
|---|
| Startup time | 32 seconds. |
|---|
| Satellite positioning | GPS/BeiDou. |
|---|
| Automatic networking and recovery | Automatically forms a temporary wireless network with existing nodes at power-on without manual configuration. Packets automatically reroute through alternate paths when a node fails or encounters interference. |
|---|
