Product overview
The Viewpro Q30TIRM-15100 is a triple-sensor gimbal camera from Shenzhen Viewpro Technology Co., Ltd., combining visible-light imaging, thermal imaging and laser distance measurement. Its EO camera uses a 1/1.8 Type STARVIS CMOS sensor with 4.17MP picture quality and 30x optical zoom. The thermal channel combines an uncooled VOx 1280×1024 detector, 12μm pixels and 15–100mm optics, with a horizontal field of view ranging from 54.2° to 8.8°. Both imaging channels support object tracking, bringing observation, tracking and screen-center distance measurement together in one payload.
The laser rangefinder has a specified range of 10km for large targets such as buildings, at least 6km for a 2.3×2.3m car target and at least 2.5km for a 1.75×0.75m person target. These typical values apply with line-of-sight visibility of at least 10km, diffuse reflectance of at least 0.3 and humidity no higher than 80%. Ranging accuracy is ≤2m RMS. Tracking specifications include minimum object contrast of 5%, SNR of 4 and object sizes from 32×32 to 128×128 pixels. Object memory lasts 100 frames, or four seconds.
The camera accepts a 4S–6S input of 14.8–25.2V, with a working voltage of 16V, average power consumption of 16W and maximum consumption of 24W. Its operating temperature range is -20°C to +50°C. Control interfaces include PWM, TTL, S.BUS, TCP and UDP, with optional IP or SDI video output. Local recording uses a class 10, FAT32 TF card up to 512G, storing 1920×1080 JPG images and 1080p MP4 video at 30fps. The package includes mounting and damping components, a USB-to-TTL cable and a foam-cushioned plastic case.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | Viewpro Q30TIRM-15100 gimbal camera |
| Electrical supply |
|
| Current and power consumption | Dynamic current: 1000~1500mA @ 16V; power consumption: average 16W, maximum 24W.Dynamic current at 16V. |
| Working environment temperature | -20 °C ~ +50 °C |
| Video outputs | IP (RTSP/UDP, 720p/1080p, 25fps/30fps, H264/H265) / SDI (1080P 30fps).Optional video outputs. |
| Local storage and recording formats |
|
| Control methods | PWM / TTL / S.BUS / TCP / UDP |
| Gimbal mechanical and controllable travel | Mechanical range: pitch/tilt -55° ~ 105°, roll ±60°, yaw/pan ±360°*N. Controllable range: pitch/tilt -45° ~ 100°, yaw/pan ±360°*N. |
| Gimbal vibration angle and centering | Pitch/roll/yaw vibration angle: ±0.02°; one-key centering supported. |
| EO sensor and picture quality | 1/1.8 Type STARVIS CMOS sensor; picture quality: 4.17MP. |
| EO optical and digital zoom | Optical zoom: 30x, f=6.5~162.5mm, F1.6 to F4.8; digital zoom: 12x (maximum 432x with StableZoom).Maximum 432x with StableZoom. |
| EO minimum object distance and horizontal viewing angle | Minimum object distance: 100 mm at wide end, 1200 mm at tele end; horizontal viewing angle: 58.1° at wide end ~ 2.3° at tele end.Wide-end and tele-end optical settings. |
| EO image signal-to-noise ratio | 50 dB (Weight On)Image S/N with Weight On. |
| EO minimum illumination | ICR-Off, typical: 0.009 lx (1/30 sec, 50%, High Sensitivity mode On); 0.09 lx (1/30 sec, 50%, High Sensitivity mode Off); 0.0012 lx (1/4 sec, 1/3 sec, 50%, High Sensitivity mode On); 0.012 lx (1/4 sec, 1/3 sec, 50%, High Sensitivity mode Off). ICR-On: 0.00008 lx (1/30 sec, 50%, High Sensitivity mode On); 0.00063 lx (1/30 sec, 50%, High Sensitivity mode Off); 0.000005 lx (1/4 sec, 1/3 sec, 30%, High Sensitivity mode On).ICR-Off values are typical. Each value applies at its stated exposure, percentage and High Sensitivity mode setting. |
| EO sensitivity, recommended illumination and gain |
|
| White balance | Auto, ATW, Indoor, Outdoor, One Push WB, Manual WB, Outdoor Auto, Sodium Vapor Lamp (Fix/Auto/Outdoor Auto). |
| Wide dynamic range and shutter speed | Wide Dynamic Range Mode: On/Off; shutter speed: 1/1 sec to 1/10000 sec (22 steps). |
| EO image processing settings |
|
| Thermal focal length and field of view |
|
| Thermal person detection, recognition and verification distances |
|
| Thermal car detection, recognition and verification distances |
|
| Thermal detector architecture | Uncooled VOx long-wave thermal imager operating at 8μm~14μm; detector: 1280*1024 pixels; pixel size: 12μm; focusing method: athermal prime lens. |
| Thermal sensitivity, palettes and digital zoom |
|
| Tracking update rate and output delay | Deviation-pixel update rate: 50Hz; deviation-pixel output delay: 5ms.EO / IR camera object tracking. |
| Tracking object requirements |
|
| Tracking speed, memory and position noise |
|
| Laser ranging distances |
|
| Laser rangefinder characteristics | Accuracy: ≤2m (RMS); pulsed laser wavelength: 1535±5nm; divergence: ≤0.5mrad; laser pulse frequency: 1~10Hz; minimum measuring range: ≤30m; measures distance between the rangefinder and the object at the screen center.Accuracy expressed as RMS; distance measured to the object at the screen center. |
| Net weight and dimensions | Net weight: 5370±20g; dimensions: 266.7*236*335.1mm.Viewport version with Viewport. |
| Supplied configuration and packaging | One gimbal camera device, screws, copper cylinders, damping balls, damping boards and one USB-to-TTL cable; plastic box with foam cushion. |
Request a quote for Viewpro Q30TIRM-15100 gimbal camera
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
