ChinaDroneRequest a quote →

Tianyiyuan TYY-G12216QP-MX2

The Tianyiyuan TYY-G12216QP-MX2 is a thin, rectangular internal active full-band GNSS positioning panel antenna. It combines multi-system satellite reception, a built-in second-generation LNA and 32dB gain, with an RG174 feed cable and standard first-generation IPEX-I connector for connection to RTK or high-precision GNSS positioning modules.

TianyiyuanDrone flight controller
Dimensions
122 mm×16 mm

Get a free quote

Product overview

The Tianyiyuan TYY-G12216QP-MX2 is a rectangular, large-plate internal active full-band GNSS positioning panel antenna for multi-system satellite signal reception. Its thin body measures 122mm×16mm and incorporates a second-generation low-noise amplifier circuit. With a gain of 32dB, it connects to RTK or high-precision GNSS positioning modules through an RG174 feed cable and comes standard with a first-generation IPEX-I connector.

Designed for embedded installation in a narrow rectangular cavity inside the host equipment, the antenna supports adhesive-backed mounting and uses the host PCB ground plane as its reference ground. Installation requires no opening in the host enclosure, and the feed cable length can be customized. As an active antenna, it requires 3.3–5V DC feed power at the RF port and must not be connected to a passive port.

Flight control & navigation

Specifications

Tianyiyuan TYY-G12216QP-MX2 specifications
SpecificationValue & conditions
ModelTYY-G12216QP-MX2
Product typeRectangular large-plate internal active full-band GNSS positioning panel antenna
Dimensions122mm×16mm
Gain32dB
ConstructionThin large-plate structure with a built-in second-generation low-noise amplifier (LNA) circuit
Signal receptionMulti-system, full-band GNSS satellite signal reception
Installation and mountingEmbedded internal installation with adhesive-backed mounting supportInstallation in a narrow rectangular internal enclosure cavity.
Reference groundUses the host PCB ground plane as its reference groundInstalled in the host equipment.
ConnectorFirst-generation IPEX-I connectorStandard connector configuration.
Feed cableRG174 feed cableConnection to RTK or high-precision GNSS positioning modules.
Enclosure requirementNo opening in the host enclosure is requiredInternal installation.
Cable length customizationFeed cable length can be customized
Power supply and port restrictionRequires 3.3–5V DC feed power at the RF port; must not be connected to a passive portDC power applied at the RF port.

Related guides