ChinaDrone.Request a quote ↗
COMPONENT

TX-AG008 28dBi GPS Ceramic Patch Antenna

By Dongguan Tengxiang Electronics Co., Ltd ↗

Dongguan Tengxiang Electronics Co., Ltd.’s TX-AG008 28dBi GPS Ceramic Patch Antenna supports GPS and Beidou positioning in drone modules and other small devices. Designed for internal installation, it combines a reinforced ceramic core and low-noise amplification circuit with RG113 cable and a U.FL female connector.

TX-AG008 GPS ceramic patch antennas with black cables and connectors, shown as a group of three
TX-AG008 GPS ceramic patch antennas with black cables and connectors, shown as a group of three
ModelTX-AG008 28dBi GPS Ceramic Patch Antenna
Positioning systemsGPS and Beidou
Physical architectureHigh-density reinforced ceramic core and low-noise amplification circuit
Installation formatCompact embedded antenna for built-in installation in small intelligent devices
Intended applicationsIoT trackers, wearable devices, drone modules, miniature navigation terminals and embedded positioning equipment
Frequency1575.42MHz

Product overview

Dongguan Tengxiang Electronics Co., Ltd.’s TX-AG008 28dBi GPS Ceramic Patch Antenna is an embedded antenna for GPS and Beidou positioning. Its compact architecture combines a high-density reinforced ceramic core with a low-noise amplification circuit for installation inside small intelligent devices. Intended integration settings include drone modules, IoT trackers, wearable devices, miniature navigation terminals and embedded positioning equipment. The product therefore serves as a positioning antenna component within a host device.

The antenna configuration includes RG113 cable and a U.FL female connector, also described as a standard IPEX connector. Its electrical specifications are 1575.42MHz frequency, 28 dBi gain, linear polarization, 50 Ohm impedance and V.S.W.R of at most 2.0. The mechanical specification identifies the radiator material as GPS module and the plastic material as rubber. Temperature limits distinguish operation at – 20 ˚C ~ + 60 ˚C from storage at – 40 ˚C ~ + 80 ˚C.

Specifications

SpecificationValue & conditions
ModelTX-AG008 28dBi GPS Ceramic Patch Antenna
Positioning systemsGPS and Beidou
Physical architectureHigh-density reinforced ceramic core and low-noise amplification circuit
Installation formatCompact embedded antenna for built-in installation in small intelligent devices
Intended applicationsIoT trackers, wearable devices, drone modules, miniature navigation terminals and embedded positioning equipment
Frequency1575.42MHz
V.S.W.RAt most 2.0
Antenna gain28 dBi
PolarizationLinear
Impedance50 Ohm
Material of radiatorGPS module
Material of plasticRubber
Cable typeRG113
Connector typeU.FL female connector
Connector descriptionStandard IPEX connector
Operating temperature– 20 ˚C ~ + 60 ˚CDuring operation.
Storage temperature– 40 ˚C ~ + 80 ˚CDuring storage.

Ask for the TX-AG008 28dBi GPS Ceramic Patch Antenna price ↑

KEEP EXPLORING

Similar products

Browse all products ↗
Flight control & navigation

BW-MINS327

By BWSENSING

The BWSENSING BW-MINS327 is a compact micro inertial navigation system for unmanned aircraft, robots, vehicles and stabilized platforms. Its 60 × 59 × 29 mm package provides gyroscope and accelerometer sensing, Kalman filtering and bias tracking, with a 9–36V DC supply and selectable interface outputs.

GEPRC TAKER F405 BLS 65A V2 STACK flight controller and ESC assembly
Flight control & navigation

GEPRC TAKER F405 BLS 65A V2 STACK

By GEPRC

The GEPRC TAKER F405 BLS 65A V2 STACK pairs an F405 flight controller with a 65A four-in-one ESC for UAV integration. It provides direct DJI Air Unit connectivity, onboard logging and six UARTs. Both boards use 30.5×30.5mm mounting, and the stack package includes cables and mounting hardware.

DJI Ace One flight control system with black modules and a white circular unit
Flight control & navigation

DJI Ace One

By DJI

DJI Ace One is a flight control system. Its documentation includes a version 2.5 user manual dated June 21, 2012, together with release notes dated July 26, 2012. Both the manual and release notes are PDF documents.

GEPRC GEP-TAKER F411-12A-E 1~2S AIO flight control board with gold solder pads
Flight control & navigation

GEP-TAKER F411-12A-E 1~2S AIO

By GEPRC

The GEPRC GEP-TAKER F411-12A-E 1~2S AIO is a compact flight control assembly for small Whoop and toothpick aircraft. It integrates an STM32F411 controller, ESC and ELRS2.4G 3.0 receiver in a 4.2g board. Supplied with a cable set, it supports LiPo/LiHv 1S-2S power and specifies 12A continuous ESC current.