Product overview
The Team BlackSheep TBS Tracer Nano TX Starter Set provides a remote-control and telemetry link for integration into drones and other radio-controlled vehicles. Its architecture pairs a radio-side Nano TX module with compact Nano RX receivers using two antenna connections for diversity. The manufacturer publishes a 250Hz refresh rate and 3ms latency, alongside a 15mi+/25km+ range claim. These are published specifications rather than demonstrated results for a particular installation; no range measurement conditions.
Integration requires checking both radio fit and onboard receiver space. The transmitter measures 65 x 48 x 22 mm, qualified in the table as JR module size, while its compatibility row specifies a LITE module bay and OpenTX V2.1+. Each receiver measures 11mm x 18mm and weighs 0.5g for the receiver alone. Its interfaces include CRSF, SBUS, PPM, PWM and SmartAudio video transmitter control. The transmitter supply specification is +5 to 9V, and the listed connector is USB-C.
The complete starter set includes one Nano TX, three Nano RX receivers and six Tracer Immortal T antennas. A separate receiver-package row lists one receiver, two Immortal-T antennas and silicone cables; procurement should distinguish that row from the complete set contents. Output is published as selectable from 25mw to 100mW, with local regulations potentially restricting modes. Power consumption is referenced at 10mW and 100mW, although the selectable-output table begins at 25mw. That discrepancy warrants configuration confirmation before allocating power.
Specifications
| Specification | Value & conditions |
|---|---|
| Transmitter latency and refresh rate | 3ms, 250HzTransmitter latency and refresh rate. |
| Transmitter selectable output power | 25mw - 100mW selectableSelectable transmitter output; output power modes may not be available because of local regulation limitations. |
| Transmitter frequency band | 2.4GHz ISM |
| Transmitter input voltage | +5 to 9VTransmitter supply requirement. |
| Transmitter connector | USB-C |
| Transmitter power consumption | 1.1W (@10mW) - 2W (@100mW)Consumption is specified at 10mW and 100mW output respectively. The 10mW consumption reference differs from the published selectable output range. |
| Transmitter dimensions | 65 x 48 x 22 mm (JR module size)The transmitter dimensions are explicitly qualified as JR module size; confirm fit for the selected radio configuration. |
| Radio compatibility | LITE module bay (e.g. TBS Tango 2, Taranis X-Lite, X9 Lite), OpenTX V2.1+Published compatibility specifies a LITE module bay and OpenTX V2.1+; confirm the selected radio configuration. |
| Receiver antenna ports | 2x u.FL / IPEX (diversity)Two receiver antenna ports provide the published diversity arrangement. |
| Receiver protocols | 2x CRSF, SBUS, PPM, 6x PWM, SmartAudio 2.0 / 2.1 (VTx Control)SmartAudio 2.0 / 2.1 is identified for video transmitter control; confirm the selected interface configuration. |
| Receiver weight | 0.5g (receiver only)Receiver only; the stated weight does not represent the complete installed receiver assembly or starter set. |
| Receiver size | 11mm x 18mmReceiver dimensions. |
| Receiver package contents | 1x TBS Tracer Nano RX, 2x Immortal-T, silicone cablesThis row describes the receiver package, separately from the complete starter set inclusion list. |
| Output power settings | 25mW / 100mWFeature-list output settings; output power modes may not be available because of local regulation limitations. |
| Starter set supplied configuration | 1 x TBS Tracer Nano TX; 3 x TBS Tracer Nano RX; 6 x TBS Tracer Immortal T AntennaComplete starter set inclusion list; distinguish this from the individual receiver package contents. |
| Published range | 15mi+/25km+Range claim. |
| Channel output | 8 or 12ch via CRSF, SBUS, inverted SBUS or PPMChannel output is specified through the listed protocols. |
Request a quote for Team BlackSheep TBS Tracer Nano TX Starter Set
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
