Product overview
The Team BlackSheep TBS Crossfire Nano RX (SE) serves as the radio receiver component in a mini- or micro-quad installation. Its physical integration requirements center on a small receiver and its separate antenna: the manufacturer lists a width of 18 mm, a height of 11 mm and a length of 11 mm, alongside a weight of 0.5 g. These are published values whose measurement scope is not explained.
The Special Edition package contains one Nano receiver, one Crossfire Immortal T V2 antenna, a spare shrink tube, six 30 AWG connection wires and a 1×4 pin header. Integration planning should account for the published 3.3–8.4 V input limits, CRSF signal format, 12 channels and PPM, SBUS, CRSF or PWM outputs. The manufacturer requires Crossfire firmware V6.10 or above. Its listed 40 km range comes without measurement conditions, so procurement should treat that figure as a manufacturer specification requiring configuration confirmation, rather than demonstrated performance for a particular aircraft.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | Team BlackSheep TBS Crossfire Nano RX (SE) |
| Product purpose | Compact, full-range receiver intended for mini- and micro-quads and installations requiring soldered connections.Receiver component for installation in an aircraft; the supplied package is not a flight platform or airframe kit. |
| Firmware requirement | Crossfire firmware V6.10 or aboveUse with Crossfire firmware V6.10 or above. |
| Signal format | CRSF |
| Minimum frequency | 868 MHzPublished minimum frequency. |
| Maximum frequency | 915 MHzPublished maximum frequency. |
| Minimum input voltage | 3.3 VPublished minimum input voltage. |
| Maximum input voltage | 8.4 VPublished maximum input voltage. |
| Range | 40 kmRange; no measurement conditions or configuration for this figure. |
| Channels | 12 |
| Output formats | PPM, SBUS, CRSF, PWMOutput options. And required interface. |
| Weight | 0.5 gWeight. |
| Height | 11 mm |
| Width | 18 mm |
| Length | 11 mm |
| Receiver supplied | 1 × TBS Crossfire Nano ReceiverListed as included in the supplied package. |
| Antenna supplied | 1 × TBS Crossfire Immortal T V2 AntennaIncluded with the Special Edition configuration. |
| Shrink tube supplied | 1 × spare shrink tubeListed as included in the supplied package. |
| Connection wires supplied | 6 × 30 AWG silicon connection wires: 2 black, 2 red, 1 white and 1 yellowListed as included in the supplied package. |
| Pin header supplied | 1 × 1×4 pin headerListed as included in the supplied package. |
Request a quote for Team BlackSheep TBS Crossfire Nano RX (SE)
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
