Product overview
The Tatusky TTSK-W10 supports handheld monitoring of consumer and FPV drone signals for low-altitude security and outdoor operations. Its broadband receiver scans 300MHz–13.4GHz with a minimum frequency step of 1MHz, using a built-in drone signature database to identify over 100 drone types. Coverage includes analog FPV, digital FPV and Wi-Fi drones, with named systems including Walksnail, HDZero and OpenIPC. The built-in display presents drone type, signal frequency, signal strength and a live spectrum, while Remote ID reception supports the specified Chinese, American and European standards.
The physical configuration combines a main unit, three probe antennas and a removable battery. The main unit measures 140 × 63 × 41mm; dimensions with antennas and clip are 360 × 63 × 54mm. Weight is 450g for the host, battery and antennas. A 2.4-inch TFT screen provides 240×320 resolution, accompanied by vibration, sound and GPIO alarms plus internal event logging. Type-C, Bluetooth and GPIO provide connection options, with GPIO supporting integration into compatible backpack-mounted countermeasure equipment. Firmware and drone signature database updates use the supported update facilities.
Detection range is 500m–5km under line-of-sight conditions, varying with the environment and drone transmission power; the maximum assumes clear line of sight and a typical drone transmitting at full power. Sensitivity reaches down to -101dBm for 20MHz-bandwidth OFDM signals. The removable 7.4V, 2800mAh lithium-ion battery supports up to eight hours of continuous operation, with approximately eight hours specified at room temperature. A full Type-C charge takes approximately 5–6 hours. Operating temperature is −25°C to +55°C, and the IP54 enclosure provides dust and splash protection but is unsuitable for immersion.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | Tatusky TTSK-W10 portable handheld drone detector |
| Receiving frequency | 300MHz‑13400MHz |
| Detectable UAVs | DJI, Autel, Fimi, Hubsan, Skydroid, analog/digital FPV and Wi-Fi drones; over 100 models |
| Named digital FPV systems | Walksnail, HDZero and OpenIPC |
| Detection range | 500m‑5kmLine of sight; varies by environment and drone power. Maximum range requires clear line of sight with a typical drone transmitting at full power. |
| Receiver sensitivity | Down to -101dBm20MHz bandwidth OFDM signals. |
| Minimum frequency step | 1MHz |
| Remote ID standards | GB46750‑2025, ASTM F3411‑22a, ASD‑STAN prEN 4709‑0022.4G /5.8G Wi-Fi and Bluetooth RID. |
| Remote ID reception bands | Wi-Fi: 2.4 GHz and 5.8 GHz; Bluetooth: 2.4 GHz |
| Screen | 2.4‑inch TFT, 240×320 resolution |
| Displayed information | Drone type, signal frequency, signal strength and real-time spectrum data |
| Alarm modes | Vibration, sound and GPIO alarm output |
| Event logging | Internal storage log |
| Interfaces | Type‑C, Bluetooth, GPIO; 3 × SMA antenna ports |
| Antenna configuration | 3 probe antennas (SMA male connector with female port) |
| Firmware updates | OTA updates via Type‑C / Bluetooth |
| Drone signature database | Built-in database expandable through supported OTA updates |
| External system integration | GPIO integration for coordinated detection and responseCompatible backpack-mounted countermeasure equipment. |
| Battery | Removable 7.4V,2800mAh Li‑ion battery |
| Battery life | Up to 8 hours continuous operationSingle removable 2,800 mAh lithium-ion battery; approximately 8 hours under room-temperature conditions. |
| Charging | Type-C charging; approximately 5–6 hoursFull charge. |
| Operating temperature | ‑25℃ ~ +55℃ |
| Protection grade | IP54; dust protection and splash resistanceNot for immersion. |
| Overall dimensions | 360 × 63 × 54mmWith antenna and clip. |
| Main unit dimensions | 140 × 63 × 41mmMain unit. |
| Weight | 450gHost, battery and antennas. |
| Detection working mode | Pure passive RF receiving; no signal transmitting |
