ChinaDrone.Request a quote ↗
COMPONENT

MN601-S IP45 Multirotor Fixed Wing UAV KV170 2PCS/SET

By T-MOTOR ↗

The T-MOTOR MN601-S IP45 Multirotor Fixed Wing UAV KV170 2PCS/SET is a UAV propulsion motor set with centrifugal cooling, a Φ68.8*34.9mm envelope and 250g motor weight including cable. KV170 integration uses 6-12S LiPo power and recommended 20-21-inch propellers. Its set designation and packing list give different motor quantities.

Request a quote ↗
Motor sizeΦ68.8*34.9mm
Copper wire180℃ high temperature resistance: Level H
Motor configuration24N28P
Centrifugal cooling designYES
Shaft diameterIN: 6mm, OUT: 6mm
Rotor dynamic balance standard≤5Mg

Product overview

The T-MOTOR Navigator MN601-S IP45 Multirotor Fixed Wing UAV KV170 2PCS/SET is a propulsion motor set for aerial photography, with applications spanning multirotors, VTOL aircraft and fixed wings, including cargo, tethered, mapping and inspection UAVs. Its 24N28P architecture occupies a Φ68.8*34.9mm motor envelope and uses 6mm inner and outer shaft diameters. Centrifugal cooling, Level H copper wire rated for 180℃ resistance, and magnets rated for 150℃ resistance support its thermal design. The motor carries an IP45 protection rating.

For KV170 integration, the electrical specification is 6-12S LiPo, with a recommended FLAME 60A 12S ESC and 20-21-inch propellers. Motor weight is 250g including cable; peak current of 30A and maximum power of 1500W each carry a 180-second qualification. The MN601-S also has a KV320 configuration with separate electrical and weight specifications. The supplied configuration has a quantity discrepancy: the product designation specifies two pieces per set, while the packing list names one selected-KV motor and one hardware pack. This is a propulsion component set.

Specifications

SpecificationValue & conditions
Motor sizeΦ68.8*34.9mm
Copper wire180℃ high temperature resistance: Level H
Motor configuration24N28P
Centrifugal cooling designYES
Shaft diameterIN: 6mm, OUT: 6mm
Rotor dynamic balance standard≤5Mg
BearingImported 626ZZ
Motor dynamic balance standard≤10Mg
Magnet temperature resistance150℃ high temperature resistance
Ingress protectionIP45
KV options170; 320KV170 and KV320 configurations, respectively.
Rated voltage6-12S; 6SKV170 and KV320 configurations, respectively; LiPo battery.
Idle current0.8AKV170; 20V.
Recommended ESCFLAME 60A 12SKV170.
Peak current30AKV170; 180s.
Recommended propeller size20-21"KV170 and KV320 configurations.
Maximum power1500WKV170; 180s.
Motor weight250gKV170; including cable.
Internal resistance115mΩKV170.
Package weight820g(2PCS/SET)KV170; 2PCS/SET.
Idle current1.6AKV320; 17V.
Recommended ESCFLAME 70A 6SKV320.
Peak current50AKV320; 180s.
Maximum power1200WKV320; 180s.
Motor weight246gKV320; including cable.
Internal resistance39mΩKV320.
Package weight815g(2PCS/SET)KV320; 2PCS/SET.
Maximum thrust6.6kg
MTBFAbout 1000hours
Supplied configurationMotor set designated 2PCS/SET; packing list specifies 1x T-MOTOR MN601 Motor KV170 (selected KV) and 1x hardware pack.KV170 selected; set designation and packing-list quantities differ.
SOURCE WITH CHINADRONE

Request a quote for MN601-S IP45 Multirotor Fixed Wing UAV KV170 2PCS/SET

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
Gemfan D3.5-3 clear yellow three-blade ducted propeller
Motors & ESCs

Gemfan D3.5-3 Ducted PC 3 Blade 1.5mm

By Gemfan

The Gemfan D3.5-3 Ducted PC 3 Blade 1.5mm is a polycarbonate propeller for 3.5-inch ducted FPV cinewhoops. It combines an 88.9 mm diameter with 3 inch pitch, supports normal and inverted mounting, and uses a 1.5 mm T-mount interface. The recommended motor is 2006, with a specified maximum takeoff weight of 350 g.