ChinaDrone.Request a quote ↗
COMPONENT

T-MOTOR MN3510 KV360/KV630/KV700

By T-MOTOR ↗

The T-MOTOR MN3510 KV360/KV630/KV700 is a Navigator Series brushless propulsion motor for multirotor, VTOL and fixed-wing UAVs. Supplied as one selected-KV motor with a hardware pack, it has a Φ41.8×28.5mm body and 600mm cables. Battery cell ranges, current limits and power ratings depend on the selected version.

Request a quote ↗
Motor variantsT-MOTOR MN3510 KV360/KV630/KV700
Motor typeNavigator Series brushless motor
Application areasMultirotors, VTOL and fixed-wing UAVs
Configuration12N14P
Internal resistance188mΩMN3510 KV360.
Internal resistance65mΩMN3510 KV630.

Product overview

The T-MOTOR MN3510 is a Navigator Series brushless propulsion motor for multirotor, VTOL and fixed-wing UAVs. It comes in KV360, KV630 and KV700 versions, with one selected motor and a hardware pack supplied. Its physical architecture combines oversized ball bearings, flexible mounting holes and a 12N14P configuration. For installation planning, the motor measures Φ41.8×28.5mm, with a 4mm shaft and a stator measuring 35mm in diameter and 10mm in height. Each version has 600mm cables in 18# AWG and weighs 97g excluding cables.

Electrical requirements differ across the three versions. KV360 accepts 3-6S LiPo batteries, while KV630 and KV700 accept 3-4S. Their maximum continuous-current ratings are respectively 15A, 22A and 25A, each with a 180-second qualification; corresponding maximum power ratings are 330W, 495W and 555W for the same duration. Including cables, the versions weigh 117g, 119g and 118g respectively. The MN3510 has a maximum thrust rating of 2.2kg and an MTBF of about 1000 hours. Temperature measurements refer to motor surface temperature after ten minutes at 100% throttle.

Specifications

SpecificationValue & conditions
Motor variantsT-MOTOR MN3510 KV360/KV630/KV700
Motor typeNavigator Series brushless motor
Application areasMultirotors, VTOL and fixed-wing UAVs
Configuration12N14P
Internal resistance188mΩMN3510 KV360.
Internal resistance65mΩMN3510 KV630.
Internal resistance50mΩMN3510 KV700.
Motor dimensionsΦ41.8×28.5mm
Shaft diameter4mm
Stator height10mm
Stator diameter35mm
Cable length600mm
Wire gauge18# AWG
Motor weight97gExcluding cables.
Motor weight117gMN3510 KV360; including cables.
Motor weight119gMN3510 KV630; including cables.
Motor weight118gMN3510 KV700; including cables.
Idle current0.4AMN3510 KV360; at 10V.
Idle current0.5AMN3510 KV630; at 10V.
Idle current0.5AMN3510 KV700; at 10V.
Cell count3-6SMN3510 KV360; LiPo battery.
Cell count3-4SMN3510 KV630 and KV700; LiPo battery.
Maximum continuous current15AMN3510 KV360; 180S.
Maximum continuous current22AMN3510 KV630; 180S.
Maximum continuous current25AMN3510 KV700; 180S.
Maximum power330WMN3510 KV360; 180S.
Maximum power495WMN3510 KV630; 180S.
Maximum power555WMN3510 KV700; 180S.
Maximum thrust and MTBFMaximum thrust: 2.2kg; MTBF: about 1000 hours
Supplied configuration1 × T-MOTOR MN3510 motor; 1 × hardware packMotor supplied in the selected KV360, KV630 or KV700 version.
SOURCE WITH CHINADRONE

Request a quote for T-MOTOR MN3510 KV360/KV630/KV700

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
HOBBYWING V11130 55KV motor with attached wires, shown at an angle.
Motors & ESCs

HOBBYWING V11130

By HOBBYWING

The HOBBYWING V11130 is a 55KV vertical-lift motor for medium and large VTOL UAVs. Its 24S LiPo configuration combines a 1666g motor with 63kg maximum thrust and 3697W maximum continuous output. Standardized mounting interfaces, a supplied propeller adapter and controller-dependent propeller positioning support propulsion integration.

Motors & ESCs

P18*6.1 Prop-2PCS/PAIR

By T-MOTOR

The T-MOTOR P18*6.1 Prop-2PCS/PAIR supplies polished carbon-fiber-and-epoxy UAV propellers with integrated two-blade construction. Sized at 18*6.1 (457.2*154.9 mm), they have an 8.2 kg thrust limit and an optimum speed range of 3000~6000 RPM/min. Motor installation requires medium-strength or stronger anaerobic screw-locking adhesive.