ChinaDrone.Request a quote ↗
COMPONENT

FLAME 80A 12S V2.0 Multi-Rotor UAVs ESC

By T-MOTOR ↗

The T-MOTOR FLAME 80A 12S V2.0 is an industrial multirotor electronic speed controller supplied with a hardware kit. It supports 6-12S LiPo batteries, a 600Hz refresh rate and 40A continuous current, with an 80A peak for 10 seconds. Its sealed aluminum enclosure has an IP56 rating, alongside configurable throttle and USB firmware updates.

Request a quote ↗
Manufacturer and modelT-MOTOR FLAME 80A 12S V2.0 Multi-Rotor UAVs ESC
Product purposeElectronic speed controller for industrial multirotor UAVs.
Continuous current40A
Peak current80A10s peak duration.
Refresh rate600Hz6-12s LiPo support.
Supported battery configuration6-12SLiPo battery.

Product overview

The T-MOTOR FLAME 80A 12S V2.0 is an electronic speed controller for integration into industrial multirotor propulsion systems. Its electrical ratings distinguish 40A continuous current from an 80A peak limited to 10 seconds. It supports 6-12S LiPo batteries and a 600Hz refresh rate. Motor integration options include stated compatibility with U12 motors, while the matching guide identifies the U7 v2 KV490 and MN701-S IP45 KV280. The throttle range is configurable, and USB support allows firmware updates.

The controller combines a layered structure and nano-technology PCB with a CNC aluminum alloy enclosure that provides heat dissipation. Its fully sealed construction carries an IP56 ingress-protection rating. A high-performance microprocessor has a separate voltage regulator IC, and protection functions cover start-up, overload, motor lock-up and throttle signal loss. The supplied configuration consists of one FLAME 80A 12S ESC and one hardware kit, making this a propulsion-control component for aircraft integration rather than a complete flight platform or airframe kit.

Specifications

SpecificationValue & conditions
Manufacturer and modelT-MOTOR FLAME 80A 12S V2.0 Multi-Rotor UAVs ESC
Product purposeElectronic speed controller for industrial multirotor UAVs.
Continuous current40A
Peak current80A10s peak duration.
Refresh rate600Hz6-12s LiPo support.
Supported battery configuration6-12SLiPo battery.
Physical architectureLayered structure.
EnclosureCNC aluminum alloy enclosure.
Heat dissipationHeat dissipation through a machined aluminum case.
Ingress protectionIP56
SealingFully sealed.
PCB technologyPCB with nano technology.
ProcessorHigh-performance microprocessor.
Processor voltage regulationSeparate voltage regulator IC for the microprocessor.
Throttle adjustmentConfigurable throttle range.
Protection functionsStart-up, overload, motor lock-up and throttle signal loss protection.
Firmware updatesUSB-supported firmware updates.
Motor compatibilityCompatible with U12 motors.
Motor matching guideU7 v2 KV490 motor / MN701-S IP45 KV280 motor.
Included equipment1x T-Motor FLAME 80A 12S ESC and 1x hardware kit.Supplied package.
SOURCE WITH CHINADRONE

Request a quote for FLAME 80A 12S V2.0 Multi-Rotor UAVs ESC

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
Scorpion HK-4015 Shaft Kit (5mm) with a metal shaft, washer and two C-clips in retail packaging
Motors & ESCs

HK-4015 Shaft Kit (5mm)

By Scorpion

The Scorpion HK-4015 Shaft Kit (5mm) is a replacement component kit for HK-4015 helicopter motors. It supplies a 73.7mm-long, 6mm-diameter shaft with a 5mm output end, plus a washer and two C-clips. Installation involves a press-fit housing interface, while use in other brushless motors depends on matching shaft dimensions.