Product overview
The Zhuhai SV Tech Co., Ltd. H5 is a high-voltage brushless motor intended for UAV and industrial equipment applications. Integration centers on matching the motor, electronic speed controller, propeller and power supply to the required operating point. The complete motor weighs 1200±10g, and installation requires checking the shaft extension, mounting holes, propeller mount and wiring harness. Dimensional, installation and wiring documentation supports this work. Final configuration depends on operating conditions and mutually agreed specifications, with component selection tied to voltage, load and cooling.
The H5 accepts 400-500 V DC, with a rated input current of 7A and maximum current of 15.3A±0.2A. Propeller selection affects current, thrust and temperature rise, so integration requires current and cooling margins. Maximum thrust must not be used as a long-duration hover capability. Service life can reach 5000 hours depending on load, temperature, installation and maintenance, while bearing temperature must remain below 100 °C under worst-case conditions. The operating ambient range is -10 ~ 65 °C; storage requires -10 ~ 50 °C and humidity ≤85%.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | H5 |
| Product category | Brushless propulsion system |
| Input voltage | 400-500 V DC |
| Rated input current | 7A |
| No-load current | 0.4A (200V)At 200V. |
| Maximum current | 15.3A±0.2A |
| Complete motor weight | 1200±10g |
| Operating ambient temperature | -10 ~ 65 °C |
| Storage temperature | -10 ~ 50 °C |
| Storage humidity | ≤85% |
| Service life | Up to 5000 hoursDepends on load, temperature, installation and maintenance. |
| Bearing temperature requirement | Below 100 °CUnder worst-case conditions. |
| Propulsion component matching | Match the motor, electronic speed controller and propeller.At the target voltage, load and cooling conditions. |
| Integration documentation | Dimensional, installation and wiring documentation |
| Final configuration | Application-dependent configurationSubject to operating conditions and mutually confirmed specifications. |
| Mechanical integration checks | Check shaft extension, mounting holes, propeller mount and wiring harness; allow current and cooling margins. |
| Propeller-dependent behavior | Current, thrust and temperature rise change with propeller selection.With different propellers on the same motor. |
| Sustained-hover limitation | Maximum tabulated thrust must not be treated as long-duration hover capability. |
