ChinaDroneRequest a quote →
SkyMEMS IMU688M inertial measurement unit with silver housing, blue label and exposed connector pinsSkyMEMS IMU688M inertial measurement unit with silver housing, blue label and exposed connector pins

SkyMEMS IMU688M High Precision 10DoF MEMS Inertial Measurement Unit

The SkyMEMS IMU688M is a tactical-grade 10DoF MEMS inertial measurement unit for UAV flight control, navigation and stabilization. It combines three-axis angular-rate, acceleration and magnetic measurements with barometer data in a compact, fully calibrated module featuring UART and SPI interfaces.

SkyMEMSIMU sensors
Applications
UAV flight control, antenna stabilization, navigation and inertial navigation systems

Get a free quote

Product overview

The SkyMEMS IMU688M delivers three-axis angular-rate, acceleration and magnetometer measurements together with barometer data in a tactical-grade 10DoF MEMS inertial measurement unit. Its applications include UAV flight control, antenna stabilization, navigation and inertial navigation systems. Typical measurement ranges are ±450°/s for the gyroscope and ±16g for the accelerometer, with factory configuration available for both ranges. Gyroscope Allan bias instability is 0.6°/h, while gyroscope and accelerometer bandwidths are 200 Hz. The barometer covers 450–1100 mbar with 0.1 mbar resolution.

Built with MEMS components and glue encapsulation, the fully calibrated IMU688M measures 47 × 44 × 14 mm and weighs 50g. It incorporates a 2 × 12-pin connector, UART and SPI interfaces, and ADIS16488A interface and protocol compatibility. UART provides a 230400 bps baud rate and 200 Hz output rate; SPI supports output up to 2000 Hz. The unit operates from a 3.3 V supply, consumes 0.15 W and works across -40~+85°C. Factory options include configurable communication rates and custom sensor ranges.

Flight control & navigationCameras & sensors

Specifications

SkyMEMS IMU688M High Precision 10DoF MEMS Inertial Measurement Unit specifications
SpecificationValue & conditions
ProductSkyMEMS IMU688M High Precision 10DoF MEMS Inertial Measurement Unit
Sensor outputsThree-axis angular rate, three-axis acceleration, three-axis magnetometer data and barometer data
ApplicationsUAV flight control, antenna stabilization, navigation and inertial navigation systems
Construction and calibrationMEMS construction with glue encapsulation; fully calibrated
Measurement rangesGyroscope ±450°/s; accelerometer ±16gTypical ranges; gyroscope and accelerometer ranges can be configured at the factory.
Gyroscope bias instability0.6°/hAllan variance.
Gyroscope averaged bias instability2°/h10s average at a fixed temperature within -40~+85°C.
Gyroscope bias repeatability and random walkBias repeatability 1.8°/h; random walk 0.08°/√h
Gyroscope bias change across temperature±0.03°/sWhole temperature-change period from -40 to +85°C, with temperature changing rate ≤2°C/minute.
Gyroscope bias change under vibration6°/hVibration at 6.06g and 20~2000Hz; calculated as (before-vibration average + after-vibration average)/2 minus during-vibration average.
Gyroscope non-linearity and bandwidthNon-linearity 100 ppm; bandwidth 200 Hz
Accelerometer averaged bias instability60 ug10s average at a fixed temperature within -40~+85°C.
Accelerometer bias repeatability and random walkBias repeatability 60 ug; random walk 0.01 m/s/√h
Accelerometer non-linearity and bandwidthNon-linearity 100 ppm; bandwidth 200 Hz
Magnetometer range and resolutionDynamic range ±2 Gauss; resolution 120 uGauss
Magnetometer noise50 uGaussRMS noise at 10Hz.
Magnetometer bandwidth200 Hz
BarometerPressure range 450–1100 mbar; resolution 0.1 mbar; absolute accuracy 1.5 mbar
UART interface230400 bps baud rate; 200 Hz output rateBaud rate and output rate can be configured at the factory.
SPI interface25 MHz serial clock frequency; output rate up to 2000 Hz
SPI sampling configurationUp to 2000Hz; 100Hz or another frequency can be set at the factoryFactory-configured SPI sampling rate.
ReliabilityMTBF 20000 h; continuous working time 120 h
Electrical characteristicsSupply voltage 3.3 V; power consumption 0.15 W; ripple 100mV (P-P)
Operating temperature-40~+85°C
Storage temperature-55°C ~ 105°C
Vibration and shock resistanceVibration resistance 20-2000Hz, 6.06g; shock resistance 1000g, 0.5ms
Dimensions and weight47 × 44 × 14 mm; 50g
Connector2 × 12 pins
Interface and protocol compatibilityADIS16488A interface and protocol compatibility
ODM optionsCustom accelerometer ranges including ±40g, MEMS gyroscope selection and application-specific algorithm optimizationCustom ODM configuration; size and shape may change with the application.

Related guides