ChinaDroneRequest a quote →

SkyMEMS ECB100 3 Axis Compass

The SkyMEMS ECB100 3 Axis Compass is a compact, board-based electronic compass sensor for heading and tilt measurement in drones, unmanned systems, laser rangefinders, antenna positioning and marine equipment. Integrated magnetic sensors, a MEMS accelerometer and onboard processing provide three-axis angle outputs with magnetic and tilt compensation.

SkyMEMSDrone flight controller
Applications
Laser rangefinders, antenna positioning, buoys, unmanned systems and marine navigation
Input voltage
3.3±0.3VDC
Weight
Around 6grams

Get a free quote

Product overview

The SkyMEMS ECB100 3 Axis Compass integrates 3-axis magneto-inductive sensors, a 3-axis MEMS accelerometer and a central processing unit on a compact board. It calculates heading in real time and provides heading, pitch and roll outputs, with tilt compensation and hard and soft iron correction for magnetic distortions within the host system. Measuring 16.5*16.5*6.5mm without pins and weighing around 6grams, it serves size-sensitive measurement systems, including laser rangefinders, antenna positioning equipment, buoys, drones, robot orientation and marine navigation.

The ECB100 operates from 3.3±0.3VDC, consumes less than 0.15W and starts within ≤200ms. Its LV-TTL interface offers a settable baud rate of 2400~115200 and a maximum output speed of 100Hz. Working temperature spans -40~+85°C. Heading accuracy is 0.8° RMS at 25°C with tilt angleless than 30°, 1.2° RMS with tilt angleless than 60°, and 1.5° RMS with tilt angleless than 85°. The module is supplied fully calibrated and requires initial user calibration after installation. Local and command-based calibration are supported; a DLL can be provided for Windows 10, 64-bit systems.

Flight control & navigation

Specifications

SkyMEMS ECB100 3 Axis Compass specifications
SpecificationValue & conditions
Manufacturer and modelSkyMEMS ECB100 3 Axis Compass
Product typeBoard-based electronic compass sensor
Integrated components3-axis magneto-inductive sensors, 3-axis MEMS accelerometer and central processing unit
Angle outputsHeading, pitch and roll
Heading calculationReal-time heading calculation with inclination compensation
Magnetic compensationHard and soft iron correction for magnetic distortions within the host system
ApplicationsLaser rangefinders, antenna positioning, buoys, unmanned systems and marine navigation
Additional applicationsDrones and robot orientation
Heading range0~360°
Heading accuracy0.8° RMS25°C, tilt angleless than 30°
Heading accuracy1.2° RMS25°C, tilt angleless than 60°
Heading accuracy1.5° RMS25°C, tilt angleless than 85°
Heading resolutionLess than 0.1°
Tilt rangeRoll: ±180º; pitch: ±85º
Tilt resolutionLess than 0.01°
Input voltage3.3±0.3VDC
Power consumptionLess than 0.15W
Startup time≤200ms
Working temperature-40~+85°C
Communication interfaceLV-TTL
Baud rate2400~115200, settable
Maximum output speed100Hz; ODM supported
Dimensions (L × W × H)16.5*16.5*6.5mmWithout pins.
WeightAround 6grams
Factory calibrationFully calibratedAs supplied.
User calibrationInitial user calibration required; local calibration supportedFirst installation in the application environment.
Command-based calibrationHost-system calibration through commands
Software supportDLL can be providedWindows 10, 64-bit operating system.
Recommended installation clearanceAt least 20~30cm from magnetic sources; 40cm preferred for motorsInstallation near magnetic sources such as metal objects, electronics or motors.

Related guides