ChinaDrone.Request a quote ↗
COMPONENT

HAKRC 5166 8S 100A ESC

By Shenzhen Haike Technology Co., Ltd. ↗

The HAKRC 5166 8S 100A ESC is an airplane electronic speed controller with stacked control and power boards, 2S-8S LiPo input and a 5V BEC. It measures 56.74*33.92 mm and weighs 19.53g. Its 100A continuous-current rating carries a 2min19s closed incubator test qualification; peak current is 120A.

HAKRC 5166 8S 100A airplane electronic speed controller circuit board
HAKRC 5166 8S 100A airplane electronic speed controller circuit board
Brand and modelHAKRC — HAKRC 5166 8S 100A ESC
Product typeAirplane electronic speed controller
Size56.74*33.92 mm
Product net weight19.53g
ESC firmwareE-X-40-Rev. 16.7 - Multi
BEC5V 5A MAX:8A

Product overview

The HAKRC 5166 8S 100A ESC is an airplane electronic speed controller built with separate control and power boards in a stacked assembly. Its power board uses a six-layer PCB with 2oz copper, supplemented by copper strips. The hardware combines 40V MOS devices in a four-parallel arrangement, Japanese Murata capacitors and an industrial-grade DC-DC converter. Control electronics comprise an EFM8BB51F16G chip running at up to 50MHz and an FD6288Q three-in-one driver. PCB construction uses resin plugging and a double pad design.

Aircraft integration must accommodate a 56.74*33.92 mm component with a net weight of 19.53g. The ESC accepts 2S-8S LiPo input and incorporates a 5V 5A BEC with an 8A maximum. Its firmware is E-X-40-Rev. 16.7 - Multi, and supported control protocols are PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300 and Dshot600. The continuous-current rating is 100A with a stated duration of 2min19s in a closed incubator test; peak current is 120A. These electrical ratings apply to the ESC component.

Specifications

SpecificationValue & conditions
Brand and modelHAKRC — HAKRC 5166 8S 100A ESC
Product typeAirplane electronic speed controller
Size56.74*33.92 mm
Product net weight19.53g
ESC firmwareE-X-40-Rev. 16.7 - Multi
BEC5V 5A MAX:8A
Input voltage2S-8S Lipo
Continuous current100A (closed incubator test, can last 2min19s)Closed incubator test; can last 2min19s.
Peak current120A
Protocol supportPWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Main control chipEFM8BB51F16G, running at up to 50MHz
Board architectureStacked hardware with separate control and power boards
Power board PCB6-layer PCB with 2oz copper
MOS configuration40V high-current-resistant MOS devices in a four-parallel arrangement
DriverFD6288Q three-in-one IC driver
PCB construction and padsResin-plugged PCB construction with double pad design
DC-DC converterIndustrial-grade DC-DC converter with high-temperature resistance
CapacitorsJapanese Murata capacitors
Copper stripsEquipped with copper strips for increased overcurrent capacity

Ask for the HAKRC 5166 8S 100A ESC price ↑

KEEP EXPLORING

Similar products

Browse all products ↗
HOBBYWING XRotor 3110 PRO 900KV motor with black housing, gold lettering and a silver shaft
Motors & ESCs

XRotor 3110 PRO

By HOBBYWING

The HOBBYWING XRotor 3110 PRO is an outer-rotor propulsion motor for aerial cinematography and racing, offered in 900KV and 1250KV variants. Both use 6S LiPo power and weigh 100g including leads. Integration uses a four-hole M3 mounting pattern, with variant-specific propeller recommendations and duration limits on maximum current and power.

CKESC FT 130A fixed-wing electronic speed controller with black finned housing and wires
Motors & ESCs

CKESC FT 130A

By NanChang ChangKong Technology Co.,Ltd

The CKESC FT 130A is a fixed-wing electronic speed controller from Nanchang ChangKong Technology, supporting 6~14S operation with an integrated 7.4 V, 10 A BEC. Its compact wired assembly provides configurable rotation, serial telemetry and multiple protection functions. Continuous current is specified at 100 A with specified cooling.

T-MOTOR V60A 14S FOC ESC with silver finned housing and attached wires
Motors & ESCs

T-MOTOR V60A 14S FOC ESC

By T-MOTOR

The T-MOTOR V60A 14S FOC ESC is a drone motor controller supporting PWM, CAN, DroneCAN and PX4. It accepts 6–14S LiPo input at 18–60V, with 30A continuous current and 60A peaks for 10 seconds. Features include dual throttle redundancy, a shielded signal cable, throttle isolation and intelligent magnetic propeller locking.

GEPRC EM3110 900KV motor with black housing, threaded shaft and lead wires
Motors & ESCs

GEPRC EM3110 900KV Motor

By GEPRC

The GEPRC EM3110 900KV Motor is an individual propulsion component for 8–10 inch long-range FPV aircraft. It combines a 12N14P configuration, N52H magnets and an M5 steel shaft, with 6S LiPo input specified. The package includes one motor, four mounting screws and an anti-slip nut.