Product overview
The SHARE C1 PRO integrates a professional-grade high-precision IMU, survey-grade SLAM algorithms, dual 1-inch CMOS image sensors and built-in RTK positioning in a 3D LiDAR scanner. It supports surveying and spatial data acquisition for real-scene modeling, topographic surveys, stockpile measurement, forestry surveys and mapping of ancient architecture. Its scanning capabilities accommodate indoor and outdoor spaces, narrow passages and complex structures. Real-time point cloud generation and real-time or post-solve processing support spatial data capture across these surveying tasks.
Each image sensor provides 16 MP effective resolution with a 2.4μm pixel size. The mechanical shutter supports global exposure and synchronizes exposure timing with camera POS data to align images with spatial positions for point cloud colorization. Integrated RTK supports 7 constellations and 24 frequencies. The scanner acquires 200,000 points/second at a typical point cloud frequency of 10 Hz. Measurement distance is 0.1–40m at 10% reflectivity and 0.1–70m at 80% reflectivity.
The unit measures 110.5*140*313.3mm and weighs 1079g, with 256G storage supporting expansion, TF card and Type-C interfaces, and Wi-Fi 6 supporting 2.4G/5G over 20 meters. Its 45.36wh (3150mAh) battery provides about 150 minutes of operation on a single battery. Charging uses a Type-C interface with PD 30W fast charging. Operating temperature is -20℃ to +50℃, while storage temperature is -20℃ to +60℃. Mechanical and electronic shutter modes are available, and the radar is installed at a 25° tilt to the ground.
