Product overview
The PSDK 102S V3 combines five surveying and mapping sensors with SHARE3DCAM S-ML fixed-focus optics for oblique imaging, facade and slope modeling, and orthophoto collection. Its APS-C sensors measure 23.5 × 15.6mm with 3.76μm pixels, paired with 35mm oblique and 25mm orthographic lenses. S-GS global shutters have a specified life of at least 500,000 operations. The orthographic viewing angle can focus as close as 10 meters; collection at 2mm resolution depends on remaining within the focusing range and adjusting the pan/tilt angle.
Integration accommodates either the independent camera body or the three-axis stabilized gimbal configuration. The body measures 120*120*82.7mm and weighs 580g; with the gimbal, these increase to 193*172.4*180.6mm and 1041g. The payload is compatible with 12-50V mounting-platform power supplies. Supported aircraft include the DJI M350 RTK and other manufacturers' rotary-wing and fixed-wing drones. Gimballed vertical fixed-wing integration requires the SHARE3DCAM interface suite and joint platform debugging. The standard 1280GB storage module supports replacement while powered on and stores each flight's data independently.
Specifications
| Specification | Value & conditions |
|---|---|
| Product name | PSDK 102S V3 |
| Dimensions | Without gimbal: 120*120*82.7mm; with gimbal: 193*172.4*180.6mmWithout gimbal / with gimbal. |
| Weight | Without gimbal: 580g; with gimbal: 1041gWithout gimbal / with gimbal. |
| Supported aircraft | DJI M350 RTK, rotary-wing drones and fixed-wing drones from other manufacturers |
| Effective pixels | Single lens: more than 25 million pixels; total: greater than 125 million pixels |
| Sensor format and pixel size | Sensor size: 23.5 × 15.6mm (APS-C format); pixel size: 3.76μm |
| Lens focal lengths | Oblique: 35mm fixed focus; orthographic: 25mm fixed focusOblique / orthographic viewing angles. |
| Storage capacity | 1280GB |
| Maximum data copy speed | 600M/sUsing the data reading module. |
| Shutter speed settings | 1/500, 1/640, 1/800, 1/1000, 1/1250 |
| Gimbal travel |
|
| Temperature ranges | Working: -20°C to 65°C; storage: -10°C to 50°CWorking / storage. |
| Imaging architecture | Five surveying and mapping image sensors |
| Image control system | S-OPG system integrating imaging, parameter settings, position calculation, dynamic image transmission, Bluetooth transmission and network communication |
| Stabilization | Three-axis stabilized gimbalWith gimbal. |
| Global shutter and service life | S-GS global shutter; shutter life: ≥500,000 operations |
| Lens construction | S-ML fixed-focus lenses across five viewing angles; front lens fluorine compound coating with waterproof and oil-proof properties |
| On-body display | OLED color screen displaying camera status, settings, trigger signal type, photo count, body temperature, ambient humidity, RTK status, Bluetooth connection, memory and shutter life |
| Storage recording capacity | 30,000 camera triggers; up to more than 150,000 full-pixel field photosStandard SHARE3DCAM1280G storage module; single storage. |
| Storage handling | Hot-swappable storage module; independent storage of each flight's dataStorage module replacement while powered on. |
| Compatible supply voltage | 12-50VMounting platform power supply. |
| Independent payload mounting | Quick-release gimbal permits independent camera-body use on fixed-wing, multirotor and other flying platformsCamera body used independently of the quick-release gimbal. |
| Gimballed vertical fixed-wing integration | Gimballed use on a vertical fixed-wing mounting platformSHARE3DCAM open source interface suite and joint debugging with the mounting platform. |
| Timing and position recording | Microsecond-level time synchronization; centimeter-level position information recorded for five viewing anglesTimeSync 2.0 synchronization with the drone. |
| Minimum focusing distance | 10 metersOrthographic viewing angle. |
| Close-range data resolution | 2mm resolutionWithin the focusing range, combined with pan/tilt angle adjustment. |
| Orthophoto capture mode | Independent downward-looking lens operation for orthophoto data collectionDownward-looking lens operated independently. |
| Operating temperature | -20°C to 65°CDuring operation. |
| Storage temperature | -10°C to 50°CDuring storage. |
Request a quote for PSDK 102S V3
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
