ChinaDroneRequest a quote →
Scorpion SII-4025 Shaft Kit with metal shaft and retaining collar in retail packagingScorpion SII-4025 Shaft Kit with metal shaft and retaining collar in retail packaging

Scorpion SII-4025 Shaft Kit

The Scorpion SII-4025 Shaft Kit is a replacement motor shaft kit for SII-4025 series airplane motors. It supplies a 6mm hardened steel shaft, 83.5mm long, with precut setscrew keyways, a new retaining collar and a replacement collar setscrew.

ScorpionMotors, ESCs & propellers
Weight
28.8 g

Get a free quote

Product overview

The Scorpion SII-4025 Shaft Kit provides an original equipment factory replacement for a bent or broken motor shaft. Its hardened steel shaft measures 6mm in diameter and 83.5mm in length for the 4025 series airplane motors. Setscrew keyways are already cut into the shaft, and the kit includes a new shaft retaining collar and a replacement setscrew for that collar. Weight including packaging is 28.8g.

The kit also fits other brushless motors requiring a 6mm shaft of the same length. Where a shorter shaft is needed to fit another motor, it can be cut using a Dremel tool and cut-off wheel. In Scorpion motors, the shaft is a slight press fit in the aluminum front housing and will not slide out after setscrew removal. Removal requires a bearing press or drill press, with the front housing supported in a block of wood to prevent warping.

Motors & ESCs

Specifications

Scorpion SII-4025 Shaft Kit specifications
SpecificationValue & conditions
Product typeScorpion SII-4025 motor shaft kit
Shaft materialHardened steelFor Scorpion SII-4025 series motors.
Included equipmentOriginal equipment factory shaft with precut setscrew keyways, new shaft retaining collar and replacement retaining-collar setscrew
Shaft diameter6mmFor 4025 series airplane motors.
Shaft length83.5mmFor 4025 series airplane motors.
Additional motor compatibilityFits other brushless motors requiring the same shaft diameter and lengthOther brushless motors requiring a 6mm shaft of this length.
Shaft shorteningCan be shortened using a Dremel tool and cut-off wheelIf necessary to fit other motors.
Shaft fit and removalSlight press fit; removing the setscrews does not allow the shaft to slide outIn Scorpion motors with an aluminum front housing.
Required removal methodPress out using a bearing press or drill press, supporting the motor front housing in a block of wood to prevent warpingDuring shaft removal.
Weight28.8gIncluding packaging.

Related guides