ChinaDroneRequest a quote →
Scorpion SII-4020 /4025 Bearing Kit with two bearings in retail packagingScorpion SII-4020 /4025 Bearing Kit with two bearings in retail packaging

Scorpion SII-4020 /4025 Bearing Kit

The Scorpion SII-4020 /4025 Bearing Kit contains two original equipment replacement motor bearings, each measuring 13mm OD x 6mm ID x 5mm thick. It fits Scorpion S-40mm Series motors using two bearings, excluding S4035 series motors, and also fits the HK-4015 Motor Series.

ScorpionMotors, ESCs & propellers
Weight
9 g

Get a free quote

Product overview

The Scorpion SII-4020 /4025 Bearing Kit supplies two original equipment replacement bearings for motor maintenance, including replacement of bearings damaged after a crash or landing in dirt. Each bearing measures 13mm outside diameter x 6mm inside diameter x 5mm thick. The bearings replace the stock bearings in Scorpion S-40mm Series motors that use two bearings, excluding S4035 series motors. The kit also fits the Scorpion HK-4015 Motor Series. Weight including packaging is 9g.

The bearings fit snugly into the motor housings, and removal of the old bearings may require gentle tapping. Install the replacement bearings by pressing on the outer race. Do not tap the new bearings into place, as impact can dent the ball races and ruin the bearings. Pressure must never be applied to the inner race during installation, because this can damage the bearing and lead to premature failure.

Motors & ESCs

Specifications

Scorpion SII-4020 /4025 Bearing Kit specifications
SpecificationValue & conditions
ProductScorpion SII-4020 /4025 Bearing Kit
Supplied bearingsTwo original equipment replacement bearings
Motor compatibilityScorpion S-40mm Series motorsFor Scorpion S-40mm Series motors that use two bearings; excludes S4035 series motors.
Additional motor compatibilityScorpion HK-4015 Motor Series
Bearing dimensions13mm OD x 6mm ID x 5mm thick
Replacement fitExact replacements for the stock motor bearings
Bearing removalSnug housing fit; old bearings may need gentle tapping for removalDuring removal from the motor housing.
Bearing installationPress bearings in by the outer race; do not tap them in or apply pressure to the inner raceDuring installation.
Weight9gIncluding packaging.

Related guides