ChinaDroneRequest a quote →

Scorpion SII-3032 Shaft Kit

The Scorpion SII-3032 Shaft Kit provides a 5mm-diameter, 89.5mm-long hardened steel replacement shaft for SII-3032 motors. Precut setscrew keyways, a new retaining collar and a replacement collar setscrew equip the kit for shaft replacement. It also fits other brushless motors requiring the same shaft dimensions.

ScorpionMotors, ESCs & propellers
Weight
17.16 g

Get a free quote

Product overview

The Scorpion SII-3032 Shaft Kit replaces a bent or broken motor shaft with a hardened steel component measuring 5mm in diameter and 89.5mm long. Alongside the original equipment replacement shaft, the kit supplies fresh retaining hardware: a collar and its setscrew. The shaft arrives with its setscrew keyways already machined. It also fits other brushless motors requiring these shaft dimensions, and can be shortened using a Dremel tool with a cut-off wheel when necessary. Weight including packaging is 17.16g.

Scorpion motor shafts have a slight press fit within the aluminum front housing, so loosening the setscrews alone does not release them. Removal requires a bearing press or drill press. Support the motor’s front housing in a block of wood while pressing the shaft out to prevent the housing from warping.

Motors & ESCs

Specifications

Scorpion SII-3032 Shaft Kit specifications
SpecificationValue & conditions
ProductScorpion SII-3032 Shaft Kit
ApplicationReplacement shaft kit for SII-3032 series motors
Shaft materialHardened steel
Shaft diameter5mm
Shaft length89.5mm
Kit contentsOriginal equipment factory shaft with precut setscrew keyways, new shaft retaining collar, and replacement retaining-collar setscrew
Other motor fitmentFits other brushless motors requiring a 5mm-diameter, 89.5mm-long shaftFor other brushless motors requiring a 5mm shaft of this length.
Shaft shorteningCan be shortened with a Dremel tool and cut-off wheelWhen necessary to fit other motors.
Shaft fitSlight press fit; shaft does not slide out after setscrew removalIn the aluminum front housing of Scorpion motors.
Shaft removalRequires pressing out with a bearing press or drill pressDuring removal, with the motor front housing supported in a block of wood to prevent warping.
Weight17.16gIncluding packaging.

Related guides