ChinaDroneRequest a quote →
Scorpion SII-3014 Shaft Kit with metal shaft and retaining collar in retail packagingScorpion SII-3014 Shaft Kit with metal shaft and retaining collar in retail packaging

Scorpion SII-3014 Shaft Kit

The Scorpion SII-3014 Shaft Kit replaces damaged shafts in SII-3014 series motors. It combines a hardened steel shaft, 5mm in diameter and 68.5mm long, with pre-cut setscrew keyways, a new retaining collar and a replacement collar screw. It also fits other brushless motors requiring those shaft dimensions.

ScorpionMotors, ESCs & propellers
Weight
13.92 g

Get a free quote

Product overview

Replace a bent or broken motor shaft with the Scorpion SII-3014 Shaft Kit. Designed for SII-3014 series motors, its hardened steel replacement measures 5mm across and 68.5mm long. Alongside the original equipment factory shaft, the kit supplies a new collar for shaft retention and a replacement screw for securing that collar. Setscrew keyways are pre-cut into the shaft. Other brushless motors accepting the same shaft dimensions can also use the kit; where a shorter shaft is needed, it can be trimmed using a Dremel tool with a cut-off wheel.

The shaft seats in the Scorpion motor’s aluminum front housing with a slight press fit, so releasing the setscrews alone does not free it. Use a bearing press or drill press for removal, supporting the front housing in a block of wood to protect it against warping. The kit’s weight, including packaging, is 13.92g.

Motors & ESCs

Specifications

Scorpion SII-3014 Shaft Kit specifications
SpecificationValue & conditions
Product typeScorpion SII-3014 Shaft Kit
Shaft materialHardened steel
Shaft diameter5mm
Shaft length68.5mm
Included equipmentOriginal equipment factory shaft with pre-cut setscrew keyways, new shaft retaining collar, and replacement retaining-collar setscrew
Other motor fitmentFits other brushless motors requiring a 5mm shaft with a length of 68.5mmFor other brushless motors requiring a 5mm shaft of this length.
Shaft shorteningCan be shortened using a Dremel tool and a cut-off wheelWhen necessary to fit other motors.
Shaft fitSlight press fitIn Scorpion motors with an aluminum front housing.
Shaft removalRequires pressing out with a bearing press or drill press; removing the setscrews alone does not release the shaftWith the motor front housing supported in a block of wood to prevent warping.
Weight13.92gIncluding packaging.

Related guides