ChinaDroneRequest a quote →
Scorpion SII-3008 Shaft Kit with a metal motor shaft and retaining collar in retail packagingScorpion SII-3008 Shaft Kit with a metal motor shaft and retaining collar in retail packaging

SII-3008 Shaft Kit

The Scorpion SII-3008 Shaft Kit is a factory replacement motor shaft kit featuring a 5mm-diameter, 62.5mm-long hardened steel shaft. Supplied with precut setscrew keyways, a new retaining collar and a replacement collar setscrew, it supports replacement of bent or broken shafts.

ScorpionMotors, ESCs & propellers
Weight
12.84 g

Get a free quote

Product overview

The Scorpion SII-3008 Shaft Kit provides a factory replacement for a bent or broken motor shaft. Its hardened steel shaft measures 5mm in diameter and 62.5mm in length for SII-3008 series motors. The kit supplies an original equipment factory shaft with the setscrew keyways already cut, together with a new shaft retaining collar and a replacement setscrew for that collar. Weight including packaging is 12.84g.

The kit also fits other brushless motors requiring a 5mm shaft of this length. Where a shorter shaft is needed, it can be trimmed with a Dremel tool and cut-off wheel. In Scorpion motors, the shaft is a slight press fit into the aluminum front housing and requires pressing out with a bearing press or drill press. Support the front housing in a block of wood during removal to prevent warping; removing the setscrews alone will not release the shaft.

Motors & ESCs

Specifications

SII-3008 Shaft Kit specifications
SpecificationValue & conditions
Product typeFactory replacement motor shaft kit
Shaft materialHardened steel
Shaft diameter5mmFor SII-3008 series motors.
Shaft length62.5mmFor SII-3008 series motors.
Supplied componentsOriginal equipment factory shaft with precut setscrew keyways, new shaft retaining collar, and replacement retaining-collar setscrew
Other motor fitmentFits other brushless motors requiring a 5mm-diameter, 62.5mm-long shaftOther brushless motors requiring a 5mm shaft of this length.
Length modificationCan be shortened using a Dremel tool and cut-off wheelWhen a shorter shaft is needed to fit other motors.
Shaft fit and removalSlight press fit; removal requires a bearing press or drill press, with the motor front housing supported in a block of wood to prevent warpingIn Scorpion motors with an aluminum front housing.
Weight12.84gIncluding packaging.

Related guides