ChinaDroneRequest a quote →
Scorpion SII-2212 Shaft Kit in retail packaging, showing the replacement shaft and retaining collar.Scorpion SII-2212 Shaft Kit in retail packaging, showing the replacement shaft and retaining collar.

Scorpion SII-2212 Shaft Kit

The Scorpion SII-2212 Shaft Kit supplies a hardened steel replacement shaft for SII-2212 motors, complete with precut setscrew keyways, a retaining collar and its replacement setscrew. The shaft measures 3mm in diameter and 49.0mm in length and also fits other brushless motors requiring those dimensions.

ScorpionMotors, ESCs & propellers
Weight
5 g

Get a free quote

Product overview

The Scorpion SII-2212 Shaft Kit provides a factory replacement for a motor shaft bent or broken during a landing. Its hardened steel shaft measures 3mm in diameter and 49.0mm in length for SII-2212 motors. The kit supplies an original equipment factory shaft with the setscrew keyways already cut, together with a new shaft retaining collar and a replacement setscrew for that collar. Weight including packaging is 5g.

The kit also fits other brushless motors requiring a 3mm shaft of the same length, and the shaft can be shortened with a Dremel tool and cut-off wheel when necessary. In Scorpion motors, the shaft has a slight press fit into the aluminum front housing, so removing the setscrews alone does not release it. Removal requires a bearing press or drill press, with the front housing supported in a block of wood to prevent warping.

Motors & ESCs

Specifications

Scorpion SII-2212 Shaft Kit specifications
SpecificationValue & conditions
ProductScorpion SII-2212 Shaft Kit
Shaft materialHardened steel
Shaft diameter3mmFor SII-2212 motors.
Shaft length49.0mmFor SII-2212 motors.
Included equipmentOriginal equipment factory shaft with precut setscrew keyways, new shaft retaining collar and replacement retaining-collar setscrew
Other motor compatibilityFits other brushless motors requiring a 3mm shaft with a length of 49.0mmOther brushless motors requiring a 3mm shaft of this length.
Shaft shorteningCan be shortened with a Dremel tool and a cut-off wheelIf necessary to fit other motors.
Shaft fitSlight press fit into the aluminum front housingIn Scorpion motors.
Shaft removalRequires pressing out with a bearing press or drill press; removing the setscrews alone does not release the shaftSupport the motor front housing in a block of wood to prevent warping.
Weight5gIncluding packaging.

Related guides