ChinaDroneRequest a quote →
Scorpion S-4020 Shaft Kit with metal motor shaft and retaining collar in retail packagingScorpion S-4020 Shaft Kit with metal motor shaft and retaining collar in retail packaging

Scorpion S-4020 Shaft Kit

The Scorpion S-4020 Shaft Kit replaces damaged shafts in S-4020 and SII-4020 series airplane motors. It combines a 6mm-diameter, 80mm-long hardened steel shaft with precut setscrew keyways, a new retaining collar and a replacement collar setscrew. Packaged weight is 26.4g.

ScorpionMotors, ESCs & propellers
Weight
26.4 g

Get a free quote

Product overview

Restore a motor after landing damage with the Scorpion S-4020 Shaft Kit, a factory replacement kit for bent or broken shafts. Designed for S-4020 and SII-4020 series airplane motors, its hardened steel shaft has a diameter of 6mm and a length of 80mm. Setscrew keyways are precut into the original equipment shaft. A new retaining collar and its replacement setscrew complete the supplied components, and the kit weighs 26.4g including packaging.

Compatibility extends to other brushless motors requiring the same 6mm shaft diameter and 80mm length. For applications needing less length, shorten the shaft with a Dremel tool fitted with a cut-off wheel. Shaft removal from Scorpion motors requires pressing: the slight press fit in the aluminum front housing remains after the setscrews are released. Use a bearing press or drill press, supporting the front housing with a wood block to protect it against warping.

Motors & ESCs

Specifications

Scorpion S-4020 Shaft Kit specifications
SpecificationValue & conditions
Product typeFactory replacement motor shaft kit
Shaft materialHardened steel
Motor fitScorpion S-4020 and SII-4020 series airplane motors
Shaft diameter6mm
Shaft length80mm
Supplied componentsOriginal equipment factory shaft with precut setscrew keyways, new shaft retaining collar and replacement retaining-collar setscrew
Other motor fitFits other brushless motors requiring a 6mm-diameter, 80mm-long shaftOther brushless motors requiring a 6mm shaft of this length.
Length modificationCan be shortened using a Dremel tool and cut-off wheelWhen a shorter shaft is necessary to fit other motors.
Shaft fit and removalSlight press fit; removal requires a bearing press or drill press, with the front housing supported in a block of wood to prevent warpingIn Scorpion motors with an aluminum front housing.
Weight26.4gIncluding packaging.

Related guides