Scorpion M-40 bearing kit

The Scorpion M-40 bearing kit contains two original equipment replacement bearings for Scorpion M-40 Series motors. Each measures 9mm OD x 4mm ID x 4mm thick and fits snugly into the motor housing. The kit provides exact replacements for the stock bearings and weighs 12g including packaging.

ScorpionDrone motor

Weight: 12 g

Product overview

The Scorpion M-40 bearing kit supplies a pair of original equipment replacement bearings for Scorpion M-40 Series motors. Designed to replace the motors’ stock bearings, each bearing measures 9mm outside diameter by 4mm inside diameter by 4mm thick. The kit supports replacement of bearings damaged after a crash or landing in dirt. The bearings fit snugly into the motor housings, and the kit weighs 12g including packaging.

During replacement, old bearings may need gentle tapping to remove them. Install the new bearings by pressing on the outer race. Do not tap them into place, as impacts can dent the ball races and ruin the bearings. Pressure must never be applied to the inner race during installation because it can damage the bearing and lead to premature failure.

Motors & ESCs

Specifications

Scorpion M-40 bearing kit specifications
Specification	Value & conditions
Product type	Motor bearing kit
Included equipment	One pair of original equipment replacement bearings for Scorpion M-40 Series motors
Bearing dimensions	9mm OD x 4mm ID x 4mm thick
Replacement fit	Exact replacements for the stock motor bearings
Housing fit	Snug, exact fit into the motor housings
Weight	12gIncluding packaging.
Removal guidance	Old bearings may need to be gently tapped out.When removing old bearings.
Installation requirements	Press bearings in by the outer race. Do not tap them into place or apply pressure to the inner race; this can damage the bearings.When installing new bearings.