ChinaDroneRequest a quote →
Scorpion HKIII-4025 Shaft Kit XL (6mm) with shaft, washer and two C-clips in packagingScorpion HKIII-4025 Shaft Kit XL (6mm) with shaft, washer and two C-clips in packaging

Scorpion HKIII-4025 Shaft Kit XL (6mm)

The Scorpion HKIII-4025 Shaft Kit XL (6mm) is a factory replacement shaft kit for HK-4025, HKIII-4025 and HKIV-4025 helicopter motors. Its hardened steel shaft combines an 8mm body with a 6mm pinion end. One washer and two C-clips accompany the shaft kit.

ScorpionMotors, ESCs & propellers
Weight
38 g

Get a free quote

Product overview

The Scorpion HKIII-4025 Shaft Kit XL (6mm) provides a factory replacement for bent or broken shafts in HK-4025, HKIII-4025 and HKIV-4025 series helicopter motors, including those used in newer T-600 helicopters. The hardened steel shaft measures 8mm in diameter and 88.5mm in length, with its pinion end ground to 6mm for mounting 6mm pinion gears. The kit also fits other brushless motors requiring a 6mm shaft of this length. Where another motor requires a shorter shaft, it can be shortened using a Dremel tool and cut-off wheel.

The shaft has a slight press fit in the Scorpion motor’s aluminum front housing, so removing the setscrews alone will not allow it to slide out. Removal requires a bearing press or drill press, with the front housing supported in a block of wood to prevent warping. The package contains one HKIII-4025 Motor Shaft Kit (6mm) -XL, one washer and two C-clips. Weight including packaging is 38g.

Motors & ESCs

Specifications

Scorpion HKIII-4025 Shaft Kit XL (6mm) specifications
SpecificationValue & conditions
ProductScorpion HKIII-4025 Shaft Kit XL (6mm)
Product typeFactory replacement motor shaft kitFor HK-4025, HKIII-4025 and HKIV-4025 series Scorpion Helicopter Motors.
Shaft materialHardened steel
Motor applicationReplacement shaft for newer T-600 helicopter motor applicationsHK-4025, HKIII-4025 and HKIV-4025 series motors used in newer T-600 helicopters.
Shaft diameter8mm
Shaft length88.5mm
Pinion mounting diameter6mm, ground to accept 6mm pinion gearsAt the pinion end.
Additional motor compatibilityFits other brushless motors with the stated shaft requirementsOther brushless motors requiring a 6mm shaft of this length.
Length adjustmentCan be shortened with a Dremel tool and cut-off wheelWhen a shorter shaft is necessary to fit other motors.
Shaft fitSlight press fitIn Scorpion motors with an aluminum front housing.
Removal methodPress out using a bearing press or drill press; removing the setscrews alone does not release the shaftDuring shaft removal, with the motor front housing supported in a block of wood to prevent warping.
Supplied shaft kitHKIII-4025 Motor Shaft Kit (6mm) -XL x1Included in the box.
Supplied washerWasher x 1Included in the box.
Supplied retaining clipsC-Clip x 2Included in the box.
Weight38gIncluding packaging.

Related guides