ChinaDroneRequest a quote →
Scorpion HKII-2216-16 brushless motor with orange end caps, a metal shaft and three connector leadsScorpion HKII-2216-16 brushless motor with orange end caps, a metal shaft and three connector leads

Scorpion HKII-2216-16

The Scorpion HKII-2216-16 is a brushless motor for helicopter and ducted fan applications, featuring gold-anodized aluminum alloy parts and an epoxy-coated stator. Rated for up to 3s LiPo operation, it delivers maximum continuous ratings of 30 Amps and 320 Watts and includes connectors, heat shrink and mounting screws.

ScorpionMotors, ESCs & propellers
Motor Kv
2608 RPM / Volt
Weight
64 Grams (2.26oz)

Get a free quote

Product overview

The Scorpion HKII-2216-16 brushless motor is designed primarily for helicopter and ducted fan applications. Its CNC-machined aluminum alloy parts have a gold-anodized finish, while the stator uses 0.2mm laminations and an epoxy coating to prevent shorts. Winding wire is rated at 180 degrees C (356 F), and the magnets withstand temperatures up to 200 degrees C (392 F). The motor combines a 16 Turn Delta winding with a Kv of 2608 RPM / Volt. Maximum continuous ratings are 30 Amps and 320 Watts, with a maximum LiPo cell count of 3s.

The motor comes with attached 3.5mm male bullet connectors, three matching female connectors, three heat-shrink pieces and four M3 screws. A propeller adapter is sold separately; propeller use requires an adapter for the 3.17mm shaft. The 2-Year warranty covers defects in materials or workmanship, excluding bearings and motor damage caused by bearing failure. Bearings require periodic maintenance and replacement, with a small drop of oil on each bearing every 5-6 flights. During installation, leave sufficient clearance between the pinion and main gear to prevent binding.

Motors & ESCs

Specifications

Scorpion HKII-2216-16 specifications
SpecificationValue & conditions
Product type and applicationScorpion HKII-2216-16 brushless motor, primarily designed for helicopter and ducted fan use.
Housing constructionCNC-machined aluminum alloy parts with a gold-anodized finish.
Stator construction0.2mm stator laminations with an epoxy coating to prevent shorts.
Wire temperature rating180 degrees C (356 F)Winding wire temperature rating.
Magnet temperature capabilityUp to 200 degrees C (392 F)Magnet temperature capability.
Stator Diameter22.0 mm (0.87 in)
Stator Thickness16.0 mm (0.63 in)
No. of Stator Arms9
Magnet Poles6
Motor Wind16 Turn Delta
Motor Wire10-Strand 0.21mm
Motor Kv2608 RPM / Volt
No-Load Current (Io)1.19 Amps @ 10 voltsAt 10 volts, with no load.
Motor Resistance (Rm)0.048 Ohms
Max Continuous Current30 AmpsContinuous operation.
Max Continuous Power320 WattsContinuous operation.
Weight64 Grams (2.26oz)
Outside Diameter27.9 mm (1.098 in)
Shaft Diameter3.17 mm (0.125 in)
Body Length33.3 mm (1.311 in)
Overall Shaft Length53.7 mm (2.11 in)
Max Lipo Cell3sMaximum LiPo cell count.
Motor Timing5deg
Drive Frequency8kHz
Connectors and box contentsAttached 3.5mm male bullet connectors; package includes one Scorpion HKII-2216-16 motor, three matching female connectors, three heat-shrink pieces and four M3 screws.Supplied equipment.
Propeller adapter requirementPropeller adapter not included; propeller use requires a separately purchased adapter for a 3.17mm shaft (1/8 inch).For propeller use.
Packaged weight200.4gIncluding packaging.
Warranty and exclusions2-Year warranty against defects in materials or workmanship; excludes bearings and subsequent motor damage caused by bearing failure.
Bearing maintenanceMaintain and replace bearings periodically. Leave sufficient pinion-to-main-gear clearance to avoid binding and apply a small drop of oil to each bearing every 5-6 flights.During installation and every 5-6 flights.
Box quantities1 motor; 3 female connectors; 3 heat-shrink pieces; 4 M3 screws.Supplied equipment.

Related guides