ChinaDroneRequest a quote →
Scorpion HKII-2216-12 brushless motor with gold-colored end caps, shaft, and three connector wiresScorpion HKII-2216-12 brushless motor with gold-colored end caps, shaft, and three connector wires

Scorpion HKII-2216-12

The Scorpion HKII-2216-12 is a brushless motor primarily designed for helicopter and ducted fan use. It combines gold-anodized, CNC-machined aluminum alloy parts with laminated, epoxy-coated stators. Rated at 3350 RPM / Volt, it includes attached bullet connectors and installation hardware, with a maximum LiPo cell count of 3s.

ScorpionMotors, ESCs & propellers
Motor Kv
3350 RPM / Volt
Weight
64 Grams (2.26oz)

Get a free quote

Product overview

The Scorpion HKII-2216-12 brushless motor is designed primarily for helicopter and ducted fan applications. Its construction combines CNC-machined aluminum alloy parts with a gold-anodized finish and epoxy-coated stators made from 0.2mm laminations. The winding wire is rated at 180 degrees C (356 F), while the custom-manufactured magnets withstand temperatures up to 200 degrees C (392 F). A 12 Turn Delta winding delivers a motor Kv of 3350 RPM / Volt. Maximum continuous current is 35 Amps, maximum continuous power is 375 Watts, and the maximum LiPo cell count is 3s.

The motor comes with 3.5mm male bullet connectors already attached. Each box contains one Scorpion HKII-2216-12 motor, three matching female connectors for the speed controller, three heat-shrink pieces and four M3 screws. A prop adapter is not included; propeller operation requires a separately purchased adapter for a 3.17mm shaft (1/8 inch). Motor weight is 64 Grams (2.26oz), with a packaged weight of 200.4g. The motor carries a 2-Year warranty against defects in materials or workmanship; bearings and subsequent motor damage caused by bearing failure are excluded.

Motors & ESCs

Specifications

Scorpion HKII-2216-12 specifications
SpecificationValue & conditions
Product and applicationScorpion HKII-2216-12
Motor type and intended useHK Series brushless motor primarily designed for helicopter and ducted fan use.
ConstructionCNC-machined aluminum alloy parts with a gold-anodized finish.
Stator construction0.2mm stator laminations with an epoxy coating to prevent shorts.
Winding wire temperature180 degrees C (356 F)Winding wire temperature rating.
Magnet temperatureUp to 200 degrees C (392 F)Magnet temperature capability.
Stator Diameter22.0 mm (0.87 in)
Stator Thickness16.0 mm (0.63 in)
No. of Stator Arms9
Magnet Poles6
Motor Wind12 Turn Delta
Motor Wire12-Strand 0.21mm
Motor Kv3350 RPM / Volt
No-Load Current (Io)1.87 Amps @ 10 voltsAt 10 volts.
Motor Resistance (Rm)0.033 Ohms
Max Continuous Current35 Amps
Max Continuous Power375 Watts
Weight64 Grams (2.26oz)
Outside Diameter27.9 mm (1.098 in)
Shaft Diameter3.17 mm (0.125 in)
Body Length33.3 mm (1.311 in)
Overall Shaft Length53.7 mm (2.11 in)
Max Lipo Cell3s
Motor Timing5deg
Drive Frequency8kHz
Connectors and box contentsAttached 3.5mm male bullet connectors; supplied hardware includes three matching female connectors, heatshrink and mounting screws.Included equipment.
Box quantities1 x Scorpion HKII-2216-12 Motor; 3 x Female Connectors; 3 x Heat Shrink; 4 x M3 Screws.Included equipment.
Prop adapter requirementProp adapter not included; propeller use requires a separately purchased adapter for a 3.17mm shaft (1/8 inch).For propeller use.
Warranty2-Year warranty against defects in materials or workmanship.Warranty excludes bearings and subsequent motor damage caused by bearing failure.
Packaged weight200.4gIncluding packaging.

Related guides