ChinaDroneRequest a quote →
Scorpion HKII-2213-20 brushless motor with gold end caps, shaft and three connector leadsScorpion HKII-2213-20 brushless motor with gold end caps, shaft and three connector leads

Scorpion HKII-2213-20

The Scorpion HKII-2213-20 is a brushless motor primarily designed for helicopter and ducted fan applications. It combines gold-anodized, CNC-machined aluminum alloy parts with an epoxy-coated stator and a 2640 RPM / Volt winding. Supplied equipment includes pre-attached bullet connectors, matching female connectors, heat shrink and mounting screws.

ScorpionMotors, ESCs & propellers
Motor Kv
2640 RPM / Volt
Weight
54 Grams (1.90oz)

Get a free quote

Product overview

The Scorpion HKII-2213-20 brushless motor is primarily designed for helicopter and ducted fan applications. Its CNC-machined aluminum alloy parts have a gold-anodized finish, while the stator combines 0.2mm laminations with an epoxy coating to prevent shorts. Winding wire is rated at 180 degrees C (356 F), and the magnets withstand temperatures up to 200 degrees C (392 F). The motor uses a 20 Turn Delta winding and delivers 2640 RPM / Volt, with maximum continuous ratings of 26 Amps and 280 Watts and a maximum LiPo cell count of 3s.

Weighing 54 Grams (1.90oz), the motor has a 27.9 mm (1.098 in) outside diameter and a 3.17 mm (0.125 in) shaft. Pre-attached 3.5mm male bullet connectors are accompanied by three matching female connectors, three pieces of heat shrink and four M3 screws. A prop adapter is not included; propeller operation requires a separately purchased adapter for a 3.17mm shaft (1/8 inch). The motor carries a 2-Year warranty against defects in materials or workmanship, excluding bearings and subsequent motor damage caused by bearing failure.

Motors & ESCs

Specifications

Scorpion HKII-2213-20 specifications
SpecificationValue & conditions
ProductScorpion HKII-2213-20 brushless motor
Primary applicationsPrimarily designed for helicopter and ducted fan use.
Housing constructionCNC-machined aluminum alloy parts with a gold-anodized finish.
Stator construction0.2mm stator laminations with an epoxy coating to prevent shorts.
Winding insulation rating180 degrees C (356 F)Winding wire temperature rating.
Magnet temperature toleranceUp to 200 degrees C (392 F)Magnet temperature tolerance.
Stator Diameter22.0 mm (0.87 in)
Stator Thickness13.0 mm (0.51 in)
No. of Stator Arms9
Magnet Poles6
Motor Wind20 Turn Delta
Motor Wire9-Strand 0.21mm
Motor Kv2640 RPM / Volt
No-Load Current (Io)1.10 Amps @ 10 voltsAt 10 volts.
Motor Resistance (Rm)0.063 Ohms
Max Continuous Current26 Amps
Max Continuous Power280 Watts
Weight54 Grams (1.90oz)
Outside Diameter27.9 mm (1.098 in)
Shaft Diameter3.17 mm (0.125 in)
Body Length30.3 mm (1.193 in)
Overall Shaft Length50.7 mm (1.996 in)
Max Lipo Cell3s
Motor Timing5deg
Drive Frequency8kHz
Connectors and box contentsPre-attached 3.5mm male bullet connectors; supplied hardware includes matching female bullet connectors, heat shrink and mounting screws.Included equipment.
Package quantities1 x Scorpion HKII-2213-20 Motor; 3 x Female Connectors; 3 x Heat Shrink; 4 x M3 ScrewsIncluded equipment.
Prop adapter requirementProp adapter not included; propeller use requires a separately purchased adapter for a 3.17mm shaft (1/8 inch).For propeller use.
Packaged weight193.2gIncluding packaging.
Warranty2-Year warranty against defects in materials or workmanship, excluding bearings and subsequent motor damage caused by bearing failure.Warranty covers defects in materials or workmanship; excludes bearings and subsequent motor damage caused by bearing failure.

Related guides