ChinaDroneRequest a quote →
Scorpion HKII-2213-16 motor with gold end caps, shaft and three connector leadsScorpion HKII-2213-16 motor with gold end caps, shaft and three connector leads

Scorpion HKII-2213-16

The Scorpion HKII-2213-16 is a 3200 RPM / Volt brushless motor for helicopter and ducted fan applications. Built with CNC-milled aluminum alloy parts, a gold-anodized finish and epoxy-coated stators, it supports up to 3s LiPo and comes with attached bullet connectors, matching female connectors, heat shrink and mounting screws.

ScorpionMotors, ESCs & propellers
Motor Kv
3200 RPM / Volt
Weight
60 Grams (2.11oz)

Get a free quote

Product overview

The Scorpion HKII-2213-16 is a brushless motor primarily designed for helicopter and ducted fan applications. Its 3200 RPM / Volt winding has a maximum continuous current of 30 Amps and maximum continuous power of 310 Watts, with a maximum LiPo cell count of 3s. The motor weighs 60 Grams (2.11oz) and combines a 27.9 mm (1.098 in) outside diameter with a 30.3 mm (1.193 in) body length. No-load current is 1.60 Amps at 10 volts.

CNC-milled aluminum alloy parts receive a gold-anodized finish. Inside, the stator uses 0.2mm laminations and an epoxy coating to prevent shorts. The winding wire is rated at 180 degrees C (356 F), while the custom-manufactured magnets withstand temperatures up to 200 degrees C (392 F). The motor incorporates nine stator arms, six magnet poles and a 16 Turn Delta winding using 10-Strand 0.21mm wire. Its shaft measures 3.17 mm (0.125 in) in diameter, with an overall shaft length of 50.7 mm (1.996 in).

The motor comes with 3.5mm male bullet connectors attached, plus three matching female connectors for the speed controller, three heat-shrink pieces and four M3 screws. A prop adapter is not included; propeller use requires a separately purchased adapter for a 3.17mm shaft (1/8 inch). A 2-Year warranty covers defects in materials or workmanship, excluding bearings and motor damage caused by bearing failure. Bearings require periodic maintenance and replacement, including a small drop of oil on each bearing every 5-6 flights.

Motors & ESCs

Specifications

Scorpion HKII-2213-16 specifications
SpecificationValue & conditions
Product and applicationScorpion HKII-2213-16 brushless motor
Intended use and prop adapterPrimarily designed for helicopter and ducted fan use. Prop adapter not included; propeller use requires a separately purchased adapter for a 3.17mm shaft (1/8 inch).
Housing constructionCNC-milled aluminum alloy parts with a gold-anodized finish
Stator construction and winding rating0.2mm stator laminations with epoxy coating to prevent shorts; winding wire rated at 180 degrees C (356 F)
Magnet temperature capabilityCustom-manufactured magnets withstand temperatures up to 200 degrees C (392 F).
Attached connectors3.5mm male bullet connectors already attached
Box contents1 x Scorpion HKII-2213-16 motor; 3 x female connectors; 3 x heat shrink; 4 x M3 screws
Warranty and exclusions2-Year warranty against defects in materials or workmanship; bearings and subsequent motor damage caused by bearing failure are excluded.
Bearing maintenanceMaintain and replace bearings periodically. Leave sufficient clearance between pinion and main gear to avoid binding; apply a small drop of oil to each bearing every 5-6 flights.During motor installation and every 5-6 flights.
Stator Diameter22.0 mm (0.87 in)
Stator Thickness13.0 mm (0.51 in)
No. of Stator Arms9
Magnet Poles6
Motor Wind16 Turn Delta
Motor Wire10-Strand 0.21mm
Motor Kv3200 RPM / Volt
No-Load Current (Io)1.60 Amps @ 10 voltsAt 10 volts.
Motor Resistance (Rm)0.040 Ohms
Max Continuous Current30 AmpsContinuous operation.
Max Continuous Power310 WattsContinuous operation.
Weight60 Grams (2.11oz)
Outside Diameter27.9 mm (1.098 in)
Shaft Diameter3.17 mm (0.125 in)
Body Length30.3 mm (1.193 in)
Overall Shaft Length50.7 mm (1.996 in)
Max Lipo Cell3sMaximum LiPo cell count.
Motor Timing5deg
Drive Frequency8kHz
Packaged weight190.8gIncluding packaging.

Related guides