ChinaDroneRequest a quote →
Scorpion HK-4535 Shaft Kit XL (6mm 50mm) with metal shaft, rings and screws in packagingScorpion HK-4535 Shaft Kit XL (6mm 50mm) with metal shaft, rings and screws in packaging

Scorpion HK-4535 Shaft Kit XL (6mm 50mm)

The Scorpion HK-4535 Shaft Kit XL (6mm 50mm) provides an extended replacement shaft for HK-4535 series helicopter motors. Its hardened steel shaft measures 10mm in diameter and 116mm long, with a pinion end ground to 6mm for 6mm pinion gears.

ScorpionMotors, ESCs & propellers
Weight
56.8 g

Get a free quote

Product overview

The Scorpion HK-4535 Shaft Kit XL (6mm 50mm) supplies an extended hardened steel replacement shaft for HK-4535 series Scorpion Helicopter Motors. Intended for replacement after a shaft bends or breaks, it measures 10mm in diameter and 116mm long. Its pinion end is ground to 6mm to accept 6mm pinion gears. The kit also fits other brushless motors requiring a 10mm shaft of this length, and the shaft can be shortened with a Dremel tool and cut-off wheel when necessary.

The shaft forms a slight press fit in the Scorpion motor’s aluminum front housing, so removing the setscrews alone does not allow it to slide out. Removal requires a bearing press or drill press, with the front housing supported in a block of wood to prevent warping. Weight including packaging is 56.8g.

Motors & ESCs

Specifications

Scorpion HK-4535 Shaft Kit XL (6mm 50mm) specifications
SpecificationValue & conditions
ProductScorpion HK-4535 Shaft Kit XL (6mm 50mm)
Replacement applicationFactory replacement shaft for all HK-4535 series Scorpion Helicopter Motors.For HK-4535 series Scorpion Helicopter Motors.
Shaft materialHardened steel.
Shaft diameter10mmExtended shaft for HK-4535 series motors.
Shaft length116mmExtended shaft for HK-4535 series motors.
Pinion interfaceGround to 6mm for installation of 6mm pinion gears.At the pinion end.
Additional motor compatibilityFits other brushless motors requiring a 10mm shaft of the same length.Other brushless motors requiring a 10mm shaft of this length.
Length modificationCan be shortened using a Dremel tool and a cut-off wheel.When necessary to fit other motors.
Shaft fit and removalSlight press fit; removal requires a bearing press or drill press with the front housing supported in a block of wood to prevent warping. Removing the setscrews alone does not release the shaft.In Scorpion motors with an aluminum front housing.
Weight56.8gIncluding packaging.

Related guides