ChinaDroneRequest a quote →
Scorpion HK-4530 Shaft Kit (6mm 37mm) with metal shaft, retaining rings and small hardware in packagingScorpion HK-4530 Shaft Kit (6mm 37mm) with metal shaft, retaining rings and small hardware in packaging

Scorpion HK-4530 Shaft Kit (6mm 37mm)

The Scorpion HK-4530 Shaft Kit (6mm 37mm) supplies a hardened steel replacement shaft for HK-4530 and HKII-4530 helicopter motors. The shaft has a 10mm body diameter, 100mm length and a pinion end ground to 6mm for 6mm pinion gears.

ScorpionMotors, ESCs & propellers
Weight
78 g

Get a free quote

Product overview

The Scorpion HK-4530 Shaft Kit (6mm 37mm) provides a factory replacement shaft for HK-4530 and HKII-4530 series Scorpion helicopter motors after a shaft bends or breaks. The hardened steel shaft measures 10mm in diameter and 100mm in length. Its pinion end is ground to 6mm for installation of 6mm pinion gears. The kit also fits other brushless motors requiring a 10mm shaft of this length; it can be shortened with a Dremel tool and cut-off wheel when necessary.

In Scorpion motors, the shaft forms a slight press fit with the aluminum front housing and will not slide out simply by removing the setscrews. Removal requires a bearing press or drill press, with the front housing supported in a block of wood to prevent warping. The kit weighs 78g including packaging.

Motors & ESCs

Specifications

Scorpion HK-4530 Shaft Kit (6mm 37mm) specifications
SpecificationValue & conditions
Product typeFactory replacement motor shaft kit
Motor compatibilityAll Scorpion HK-4530 and HKII-4530 series helicopter motors
Shaft materialHardened steel
Shaft diameter10mm
Shaft length100mm
Pinion-end diameter6mm, for 6mm pinion gearsAt the pinion end.
Additional motor compatibilityFits other brushless motors requiring a 10mm-diameter, 100mm-long shaftOther brushless motors requiring a 10mm shaft of this length.
Length modificationCan be shortened with a Dremel tool and cut-off wheelWhen a shorter shaft is necessary to fit other motors.
Shaft fit and removalSlight press fit; removal requires a bearing press or drill press, with the motor front housing supported in a block of wood to prevent warpingIn Scorpion motors with an aluminum front housing.
Weight78gIncluding packaging.

Related guides