ChinaDrone.Request a quote ↗
COMPONENT

Scorpion A-3017-600kv

By Scorpion ↗

The Scorpion A-3017-600kv is a propulsion motor for 6s-powered acrobatic airplanes and suitable UAVs, supplied with mounting and connection hardware. It delivers 555 Watts continuously and 962 Watts at intermittent full throttle for 5–60 seconds, depending on use case and cooling.

Request a quote ↗
Scorpion A-3017-600kv motor with gold and black housing
Scorpion A-3017-600kv motor with gold and black housing
Motor Kv600 RPM / Volt
Motor weight136g (4.80 oz)Motor only.
Weight with mount and accessories154g (5.43 oz)Including mount and accessories.
Motor body dimensions36.60 mm x 36.5mm (1.44" x 1.44")
External shaft diameter5.98mm
Continuous current25A

Product overview

The Scorpion A-3017-600kv is an aircraft propulsion motor intended for 6s-powered 48-inch acrobatic airplanes and suitable UAVs. Recommended aircraft weights are 1.3kg - 2.18kg for acrobatic applications and 2.3kg - 5.03kg for single-engine sport or UAV use. Its architecture combines a 30.0mm-diameter, 17mm-thick stator, 12 stator arms, 14 magnet poles and a 9T/10T Delta winding. Installation planning must accommodate a 36.60mm × 36.5mm motor body and 5.98mm external shaft. The motor weighs 136g, or 154g with the mount and accessories.

The package supplies one motor with propeller washer and nut, a 44/58mm cross mount with screws, three female bullet connectors with heatshrink, 16 thrust spacing washers, four M3x10 screws, four M3x16 screws and three stickers. The recommended ESC is the Tribunus 06-80A ESC SBEC. Propeller recommendations are 12x6 or 12x7 for efficiency, 13x6 as optimal, and 13x6.5 or 14x6 for high altitude. Continuous ratings are 25A and 555 Watts; peak ratings are 43A and 962 Watts. Peak power is limited to intermittent full throttle for 5–60 seconds, depending on use case and cooling. Higher cell counts are possible with smaller propellers.

Specifications

SpecificationValue & conditions
Motor Kv600 RPM / Volt
Motor weight136g (4.80 oz)Motor only.
Weight with mount and accessories154g (5.43 oz)Including mount and accessories.
Motor body dimensions36.60 mm x 36.5mm (1.44" x 1.44")
External shaft diameter5.98mm
Continuous current25A
Continuous power555 Watts
Peak current43A
Peak power962 WattsIntermittent full throttle for 5 - 60 seconds, depending on use case and cooling.
Maximum rated LiPo cell count6sHigher cell count possible with smaller propeller usage.
Stator diameter30.0 mm (1.18 in)
Stator thickness17 mm (0.67 in)
Stator arms12
Magnet poles14
Motor winding9T/10T Delta
Motor wire8-Strand x 0.25
No-load current0.99 AmpsIO/15V.
Motor internal resistance50 mΩPhase-to-phase.
Motor inductance19.0µHPhase-to-phase at 1khz.
Recommended ESCTribunus 06-80A ESC SBEC
Acrobatic aircraft weight range1.3kg - 2.18kg (46oz - 77oz)600kv acrobatic airplane application.
Sport / UAV aircraft weight range2.3kg - 5.03kg (81.1oz - 177.6oz)600kv single-engine sport or UAV application.
Intended applicationMotor for 6s-powered 48-inch acrobatic airplanes or suitable UAVs.600kv version with 6s power.
Recommended propeller selection12x6 / 12x7 for efficiency; 13x6 as optimal; 13x6.5 / 14x6 for high altitude.
Supplied configuration1 × A-3017 motor with propeller washer and nut; 1 × 44/58mm cross mount with screws; 3 × female bullet connectors with heatshrink; 3 × Scorpion stickers; 16 × 3x10x1mm thrust spacing washers; 4 × M3x10 mounting screws; 4 × M3x16 mounting screws.Included equipment.
Peak-power duration5 - 60 secondsIntermittent full-throttle operation; duration depends on use case and cooling.
Higher cell-count provisionHigher cell count is possible with a smaller propeller.Smaller propeller usage.
Packaged weight252gIncluding packaging.
SOURCE WITH CHINADRONE

Request a quote for Scorpion A-3017-600kv

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
MAD BSC 4315 450KV FPV motor with black housing and threaded shaft
Motors & ESCs

BSC 4315 FPV Drone Motor

By MAD Components

The MAD BSC 4315 FPV Drone Motor is a 450KV propulsion component for large-scale FPV and multirotor aircraft. Its 4315 stator and 12N14P electromagnetic structure are designed for 13–15 inch propellers. Integration details include a D:51 × 59.8 mm motor envelope, M6 nut propeller attachment and 600 mm silicone cable.