ChinaDroneRequest a quote →
Scorpion 80V 1880uF Capacitor / PDB Board (no mount) with four upright capacitorsScorpion 80V 1880uF Capacitor / PDB Board (no mount) with four upright capacitors

Scorpion 80V 1880uF Capacitor / PDB Board (no mount)

The Scorpion 80V 1880uF Capacitor / PDB Board (no mount) combines a low impedance capacitor bank for HV ESCs with power distribution for multiple batteries. Designed for large UAV installations with long battery leads, it supports up to 14s LiPo configurations and provides soldering connections for parallel and/or series battery arrangements.

ScorpionPower distribution boards
Weight
112 g

Get a free quote

Product overview

The Scorpion 80V 1880uF Capacitor / PDB Board (no mount) is a low impedance capacitor bank designed for high-voltage ESCs using up to 14s LiPo batteries. Intended for large UAV installations, it addresses long battery-to-ESC wiring, which can introduce noise and voltage ripple that may damage the ESC. Its intended application covers battery input wires longer than 150mm and up to 1.5 meters.

The board also provides power distribution, simplifying the soldering of battery leads when multiple batteries are connected in parallel and/or series. For battery wires longer than 1.5 meters, installation requires one capacitor board soldered near the ESC and additional boards along the wires at every 1.5 meters of wire length. This no-mount version includes one Capacitor / PDB Board, with a weight of 112g including packaging.

Batteries & charging

Specifications

Scorpion 80V 1880uF Capacitor / PDB Board (no mount) specifications
SpecificationValue & conditions
ProductScorpion 80V 1880uF Capacitor / PDB Board (no mount)
Capacitor bank constructionLow impedance capacitor bank
Supported battery configurationUp to 14s LiPoFor HV ESCs
Intended wire lengthIn excess of 150mm up to 1.5 metersBattery-to-ESC input wires
Power distribution functionPower Distribution Board for soldering battery leadsMultiple batteries connected in parallel and/or series
Capacitor board installation requirementOne capacitor board soldered near the ESC, with additional capacitor boards soldered along the wires every 1.5 meters of wire lengthBattery wire length in excess of 1.5 meter
Included equipment1 x Capacitor / PDB Board
Weight112gIncluding packaging

Related guides