Product overview
The Rctimer TS-3630BB is an analog servo with a FET drive, a carbon brush motor and plastic gearing. Its physical construction combines a wear-resistant case with a double ball bearing arrangement. The servo weighs 36 g and measures 40.8 × 20.1 × 38.0 mm, defining the component’s space requirement for installation. A connector wire length of 180cm provides the stated wiring reach. This is a servo component rather than a flight platform or airframe kit.
Electrical integration requires an operating supply within 4.8V ~ 6.0V, with idle current specified as 4mA. Operating speed is voltage-dependent: 0.16 sec/60 at 4.8V and 0.19 sec/60 at 6V. Stall torque is greater than 3 kg-cm at 4.8V. These figures retain their distinct voltage conditions: the torque rating applies at 4.8V, while the two speed values describe operation at their respective supply voltages.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | Rctimer TS-3630BB |
| Product type | FET servo |
| Operating voltage | 4.8V ~ 6.0V |
| Idle current | 4mA |
| Operating speed at 4.8V | 0.16 sec/60At 4.8V. |
| Operating speed at 6V | 0.19 sec/60At 6V. |
| Stall torque | Greater than 3 kg-cmAt 4.8V. |
| Weight | 36 g |
| Dimensions | 40.8*20.1*38.0mm |
| Connector wire length | 180cm |
| Drive | FET |
| Servo control type | Analog |
| Gear material | Plastic |
| Case construction | Wear-resistant case |
| Bearing arrangement | Double ball bearing |
| Motor type | Carbon brush motor |
