ChinaDroneRequest a quote →

RCTimer MAVLink-OSD V2.2

The RCTimer MAVLink-OSD V2.2 is an Arduino-based monochrome on-screen display board for supported flight controller systems. It combines an ATMEGA328P microcontroller, MAXIM MAX7456-EUI display hardware and a switching DC/DC power supply, supports NTSC and PAL, and comes with a 150mm UART 4-pin cable.

RCTimerDatalinks, video & radio
Operating voltage
5 V
Dimensions
19 mm x 39 mm

Get a free quote

Product overview

The RCTimer MAVLink-OSD V2.2 is an Arduino-based on-screen display board compatible with original MinimOSD and suitable for APM, PX4, PIXHAWK, Multiwii, CLEANFLIGHT and OPENPILOT systems. Its hardware combines an ATMEGA328P microcontroller with an original MAXIM MAX7456-EUI monochrome display chip and supports NTSC and PAL video. A switching DC/DC power supply incorporates a 5V/1.2A step-down converter for the MAX7456-EUI. Operating voltage is 5V at the FTDI connector and 6~24V at the Video I/O connector.

Firmware support covers 3DRobotics original, MinimOSD-Extra, rush-osd-development, minoposd and MWOSD, with 3DR original firmware supplied by default. For Multiwii running rush-osd-development, four bottom-side solder pads connect receiver RSSI, video voltage, a current sensor and main voltage. With CC3D running minoposd, pads 5 and 6 provide voltage and current detection. The board measures 19mm x 39mm excluding the connector and includes an FTDI connector. The package contains one MAVLink-OSD board and one 150mm UART 4-pin cable.

Links & controllers

Specifications

RCTimer MAVLink-OSD V2.2 specifications
SpecificationValue & conditions
ProductRCTimer MAVLink-OSD V2.2 on-screen display board
Project platformArduino-based
MinimOSD compatibilityFully compatible with original MinimOSD
Flight controller supportAPM, PX4, PIXHAWK, Multiwii, CLEANFLIGHT and OPENPILOT
Power supply architectureSwitching DC/DC step-down power supply
Supported firmware3DRobotics original, MinimOSD-Extra, rush-osd-development, minoposd and MWOSD
Default firmware3DR originalAs supplied.
Bottom solder padsFour bottom-side solder pads provide RSSI, voltage and current detectionMultiwii with rush-osd-development firmware.
Pad 1 inputRSSI from receiverMultiwii with rush-osd-development firmware.
Pad 2 inputVideo voltageMultiwii with rush-osd-development firmware.
Pad 3 inputCurrent sensorMultiwii with rush-osd-development firmware.
Pad 4 inputMain voltageMultiwii with rush-osd-development firmware.
Pads 5 and 6Voltage and current detectionCC3D with minoposd firmware.
MicrocontrollerATMEGA328P
Display hardwareOriginal MAXIM MAX7456-EUI monochrome on-screen display
DC/DC converter5V/1.2A step-down converterFor MAX7456-EUI.
Operating voltage5VFTDI connector.
Operating voltage6~24VVideo I/O connector.
Video standardsNTSC and PAL
InterfaceFTDI connector
Dimensions19mm x 39mmExcluding connector.
OSD board supplied1 × MAVLink-OSDIncluded equipment.
Cable supplied1 × 150mm UART 4-pin cableIncluded equipment.

Related guides