ChinaDrone.Request a quote ↗
COMPONENT

R8FM

By RadioLink ↗

The RadioLink R8FM is an eight-channel mini receiver with SBUS/PPM outputs for aircraft integration. It weighs 2.5 g and requires a 3–6 V supply. Its specified 2000-meter airborne control distance has maximum-range conditions of unobstructed, interference-free operation and may vary depending on local regulations.

Request a quote ↗
RadioLink R8FM mini receiver with antenna and three connector pins
RadioLink R8FM mini receiver with antenna and three connector pins
Product typeRadioLink R8FM eight-channel mini receiver
Size30*17.5mm (1.18"*0.69")
Weight2.5g(0.09oz)
Channel count8 channels
Signal outputsSBUS/PPM
Operating voltage3~6V

Product overview

The RadioLink R8FM is an eight-channel mini receiver for aircraft radio-control integration, including mini racing drones and gliders. Its 30 × 17.5 mm dimensions and 2.5 g weight suit installations with limited space and mass allowance, while its antenna measures 85 mm. The receiver delivers eight channels through SBUS or PPM. Compatible flight controllers include PIXHWAK, MINI PIX, TURBO PIX and APM, provided they support SBUS or PPM input. The product is a receiver component for integration into an aircraft.

Electrical integration requires a 3–6 V supply; operating current is 38–45 mA at 5 V. The R8FM uses FHSS spread spectrum with 67-channel pseudo-random frequency hopping to help reduce signal interference. Its specified airborne control distance is 2000 meters (1.24 miles), with maximum range tested in unobstructed areas free of interference; distance may vary depending on local regulations. Compatibility covers the specified T8FB, T8S and RC-series transmitter variants, with a flight controller required. Section precision is 4096, at 0.25 microseconds per section.

Specifications

SpecificationValue & conditions
Product typeRadioLink R8FM eight-channel mini receiver
Size30*17.5mm (1.18"*0.69")
Weight2.5g(0.09oz)
Channel count8 channels
Signal outputsSBUS/PPM
Operating voltage3~6V
Operating current38-45mA@5VAt 5V.
Antenna length85mm
Section precision4096, 0.25us per section
Control distance2000 meters (1.24Miles); may vary depending on local regulations.In the air; maximum range tested in unobstructed areas free of interference.
Flight controller compatibilityPIXHWAK, MINI PIX, TURBO PIX, and APMFlight controllers must support SBUS or PPM.
Compatible transmittersT8FB(BT)/T8S(BT)/T8FB(OTG)/T8S(OTG)/RC8P/RC8X/RC6GS V3/RC6GS V2/RC6GS/RC4GS V3/RC4GS V2/RC4GSMust work with a flight controller.
Radio architectureFHSS spread spectrum with 67-channel pseudo-random frequency hopping to help reduce signal interference
Aircraft applicationsMini racing drones and gliders
SOURCE WITH CHINADRONE

Request a quote for R8FM

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
Links & controllers

FTDI Tool V1.0

By RCTimer

The RCTimer FTDI Tool V1.0 is an FT232RL USB-to-serial breakout board with a bottom-mounted six-pin header and TX/RX LEDs. DTR enables automatic reset during sketch downloads when the Arduino target routes its reset pin to a six-pin connector. It ships at 5V; switching power output and IO to 3.3V requires cutting a trace and adding a solder jumper.