ChinaDroneRequest a quote →
RadioLink CrossRace flight controller boardRadioLink CrossRace flight controller board

RadioLink CrossRace

RadioLink CrossRace is a compact flight controller with integrated OSD, combining APM (ArduPilot) PosHold operation with Betaflight manual control performance. Its 37*37mm design supports up to 12 output channels, 2-8 axis multirotors, 4-in-1 ESCs and digital video connections, with built-in 5V and 12V dual BEC power supplies.

RadioLinkDrone flight controller
Dimensions
37*37 mm

Get a free quote

Product overview

The RadioLink CrossRace is a flight controller with integrated OSD for racing drones and other UAV applications, including aerial photography, surveying, agriculture and education. It combines APM (ArduPilot) PosHold flight mode with Betaflight manual control performance. The 37*37mm controller supports up to 12 output channels and 2-8 axis multirotors. Its built-in OSD presents aircraft direction and position in real time, while software vibration damping filters high-frequency vibration to support sensor accuracy and altitude hold.

Socket interfaces and soldering pads provide connection and expansion options, supported by built-in 5V and 12V dual BEC power supplies. CrossRace supports 4-in-1 ESCs, ESC telemetry, and DShot, OneShot and PWM signals. DJI O3 and CADDX Walksnail Avatar HD PRO KIT digital video systems connect through plug-and-play interfaces. The package contains one CrossRace, a buzzer requiring soldering, two TELEM1&2 connection cables, a USB setup or upgrade cable, a four-in-one ESC cable, a receiver cable and a packing box. Firmware upgrades use RadioLink firmware only.

Flight control & navigation

Specifications

RadioLink CrossRace specifications
SpecificationValue & conditions
Product typeRadioLink CrossRace flight controller with built-in OSD
Dimensions37*37mm
Outputs and multirotor supportUp to 12 output channels; adaptable to a 2-8 axis multirotor
Flight control functionsCombines APM (ArduPilot) PosHold flight mode with Betaflight manual control performance
ESC supportSupports 4-in-1 ESCs and ESC telemetry
Throttle signalsDShot, OneShot and PWM
Built-in BECBuilt-in 5V and 12V dual BEC
Digital video connectionPlug-and-play digital video connectionWith DJI O3 or CADDX Walksnail Avatar HD PRO KIT digital image transmission equipment.
Analog video wiring and powerVOUT connects to the image transmitter video port; VIN connects to the camera video port. Selectable 5V and 12V power supplies.For analog video transmission; power the camera and image transmitter separately according to their respective voltages.
De-interferenceTwo-stage filtering with 78db attenuation filters out-of-band interference.With the supported RadioLink GPS TS100.
Anti-interferenceHigh-linearity LNA with an in-band input 1dB compression point of -3dBm minimizes the impact of interference signals passing through the filter.With the supported RadioLink GPS TS100.
Interface constructionSocket interfaces and soldering pads support interface expansion without changing the controller size.
OSDIntegrated OSD displays aircraft direction and position in real time without an external OSD module.
Parameter setupRadioLink Mission Planner, ArduPilot Mission Planner and QGC Mission Planner
Firmware restrictionFirmware upgrades are restricted to RadioLink firmware.For firmware upgrades.
Package contents1 CrossRace; 1 buzzer requiring soldering; 2 TELEM1&2 port connection cables; 1 USB cable for upgrade or setup; 1 four-in-one ESC connection cable; 1 receiver connection cable; 1 packing boxThe supplied buzzer requires soldering.

Related guides