ChinaDroneRequest a quote →
RadioLink CrossFlight-CN flight controller with purple housing and exposed connector pinsRadioLink CrossFlight-CN flight controller with purple housing and exposed connector pins

RadioLink CrossFlight-CN

The RadioLink CrossFlight-CN is a compact general-purpose flight controller for aircraft, vehicles, boats and robotic platforms. It combines up to 10 PWM outputs, software vibration damping and an integrated OSD. Supplied equipment includes a 2–12S power module, buzzer, I2C adapter board, status indicator, memory card and connecting cables.

RadioLinkDrone flight controller
Weight
39 g.
Dimensions
39.7 × 39.7 × 13 mm.

Get a free quote

Product overview

The RadioLink CrossFlight-CN is a general-purpose flight controller with all components made in China. It supports multirotors, fixed-wing aircraft, helicopters, cars, boats, submarines, radar tracking antennas and robotic platforms. Up to 10 PWM outputs serve applications including VTOL fixed-wing aircraft and multirotors with three to eight rotors. Its application range includes aerial photography, surveying, agricultural plant protection, logistics, firefighting, water-quality monitoring, forest inspection, formation flying and training. The controller measures 39.7 × 39.7 × 13 mm and weighs 39 g with connecting cables.

Software vibration damping uses the Mini Pix algorithm to filter high-frequency vibration. The enclosure shields the barometer from airflow during movement, and the main board incorporates a pressure vent. A built-in OSD presents flight direction, position and other flight information without an external OSD module. Connections include GPS/I2C, OSD, RC IN/BUZZER, POWER, main outputs and two telemetry ports. USB Type-C supports firmware upgrades and parameter adjustment. RadioLink, open-source, QGC and Flying Fish ground stations support parameter adjustment; the controller supports RadioLink firmware only.

The supplied power module accepts 2–12S batteries across a 7.4–50.4 V input range. Maximum detected current is 90 A, with a 22.5 A maximum per channel; BEC output is 5.3 ± 0.2 V at 2 A. The package includes the controller, power module, buzzer, I2C adapter board, status indicator and their connecting cables, plus an OSD cable and two telemetry cables. A 4G memory card, two double-sided adhesive pads, USB cable, instruction manual and printed box complete the supplied equipment.

Flight control & navigation

Specifications

RadioLink CrossFlight-CN specifications
SpecificationValue & conditions
Product type and component originCrossFlight-CN general-purpose flight controller with all components made in China.
Supported platformsMultirotors, fixed-wing aircraft, helicopters, cars, boats, submarines, radar tracking antennas and robotic platforms.
Dimensions39.7 × 39.7 × 13 mm.
Weight39 g.Including connecting cables.
PWM outputsUp to 10 PWM output channels.
Vibration filteringMini Pix software vibration-damping algorithm filters high-frequency vibration.
Barometer protectionThe enclosure shields the barometer from airflow during movement, while the main board incorporates a pressure vent.
Integrated OSDBuilt-in OSD displays flight direction, position and other flight information in real time without an external OSD module.
Battery input2–12S (7.4–50.4 V).Supplied power module.
Maximum detected current90 A maximum; 22.5 A maximum per channel.Supplied power module; per-channel limit as specified.
BEC output5.3 ± 0.2 V, 2 A.Supplied power module.
OSD pinoutGND, VOUT, VCC(5V), GND, VCC(5V), VIN.
GPS/I2C pinoutGND, SDA(3.3 pullups), SCL(3.3V pullups), RX(IN 3.3V), TX(OUT 3.3V), VCC(5V).
TELEM1 pinoutVCC(5V), TX(OUT 3.3V), RX(IN 3.3V), GND.
TELEM2 pinoutVCC(5V), TX(OUT 3.3V), RX(IN 3.3V), GND.
RC IN/BUZZER pinoutVCC(5V), RC IN, GND, unused, BZ(negative), BZ(positive).
POWER pinoutVCC(5V), VCC(5V), current, voltage, GND, GND.
USB interfaceUSB Type-C for firmware upgrades and parameter adjustment.
Ground-station supportParameter adjustment through RadioLink, open-source, QGC and Flying Fish ground stations.
Firmware restrictionSupports RadioLink firmware only.
Included hardware and accessoriesOne flight controller; one power module supporting 2–12S batteries; one buzzer; one I2C adapter board; one flight-controller status indicator; one buzzer/receiver cable; one power-module cable; one I2C adapter cable; one OSD cable for video transmitter and camera; two TELEM1/2 cables; one status-indicator cable; one 4G memory card; two double-sided adhesive pads; one USB cable; one instruction manual; one printed box.Supplied package.

Related guides