| Product type and applications | RadioLink CrossFlight-CE flight controller for helicopters, racing drones, fixed-wing aircraft, airplanes, gliders, cars and boats. |
|---|
| Control algorithm | Proprietary high-dynamic algorithm combining Kalman filtering and inertial navigation. |
|---|
| Autonomous functions | Automatic path planning for search and rescue, material delivery and crop spraying; one-touch return on signal loss or low voltage. |
|---|
| Supported multirotor configurations | VTOLs, 2-8 axis multirotors and helicopters. |
|---|
| Receiver signal protocols | SBUS/PPM/CRSF. |
|---|
| PWM outputs | 10 PWM output channels. |
|---|
| Software vibration suppression | Software filters high-frequency vibrations; helicopter installation does not require physical damping mounts.Helicopters equipped with the CrossFlight-CE flight controller. |
|---|
| Integrated OSD | Integrated OSD displays aircraft status and coordinates during FPV flight. |
|---|
| Battery monitoring | Integrated real-time aircraft voltage monitoring through FPV goggles, FPV screens or Mission Planner. |
|---|
| Redevelopment support | Supports redevelopment. |
|---|
| Parameter configuration software | Radiolink Mission Planner, ArduPilot Mission Planner and QGC Mission Planner. |
|---|
| Firmware restriction | Firmware upgrades require Radiolink Mission Planner and Radiolink firmware.Firmware upgrades. |
|---|
| Configuration replication and protection | Model configuration cloning and PID parameter encryption.Identical devices configured through Mission Planner. |
|---|
| Input voltage | 2-12S (7.4-50.4V).Included power module. |
|---|
| Maximum detection current | 90A; single ESC maximum detection current: 22.5A.Included power module; single ESC limit as specified. |
|---|
| BEC output | 5.3±0.2V, 2A.Included power module. |
|---|
| OSD pinout | GND, VOUT, VCC(5V), GND, VCC(5V), VIN. |
|---|
| GPS/I2C pinout | GND, SDA(3.3 pullups), SCL(3.3V pullups), RX(IN 3.3V), TX(OUT 3.3V), VCC(5V). |
|---|
| RC IN/BUZZER pinout | VCC(5V), RC IN, GND, Null, BZ(-), BZ(+). |
|---|
| POWER pinout | VCC(5V), VCC(5V), Current, Voltage, GND, GND. |
|---|
| TELEM1 pinout | VCC(5V), TX(OUT 3.3V), RX(IN 3.3V), GND. |
|---|
| TELEM2 pinout | VCC(5V), TX(OUT 3.3V), RX(IN 3.3V), GND. |
|---|
| USB connection | Type-C port for firmware upgrades and parameter tuning. |
|---|
| Power module quantity | One power module, selected from two package versions.Default factory package. |
|---|
| Controller and electronic accessories | CrossFlight-CE flight controller ×1; 2-12S power module ×1; buzzer ×1; I2C transfer board ×1; flight controller status indicator LED ×1; 4G TF (MicroSD) card ×1.Supplied equipment. |
|---|
| Connection cables | Buzzer/receiver cable ×1; power module cable ×1; I2C transfer board cable ×1; OSD port cable ×1; TELEM1/2 port cables ×2; flight controller status indicator LED cable ×1.Supplied equipment. |
|---|
| Additional package contents | Double-sided adhesive tape ×1; Type-C cable ×1; user manual ×1; packing box ×1.Supplied equipment. |
|---|