ChinaDroneRequest a quote →
Radiolink ANT-M7 RTK rover antenna shown upright and on its sideRadiolink ANT-M7 RTK rover antenna shown upright and on its side

Radiolink ANT-M7

The Radiolink ANT-M7 is an RTK rover antenna for high-precision positioning, suitable for high-speed aircraft. Its four-feed, eight-arm passive design combines low-elevation-angle satellite tracking with in-band and out-of-band interference suppression. IP67 protection supports continuous outdoor operation, and configuration parameters enable switching between rover and base station roles.

RadioLinkDrone flight controller

Get a free quote

Product overview

The Radiolink ANT-M7 is an RTK rover antenna suitable for high-speed aircraft. Its four-feed, eight-arm passive construction provides a low axial ratio, small phase center offset and stable phase center for accurate positioning with repeatability and directivity. The stereo antenna structure increases receiving area and height, improving low-elevation-angle gain and satellite tracking. Out-of-band interference suppression combines a pre-SAF filter with a two-stage surface acoustic wave filter, while a high-linearity LNA, ultra-low noise coefficient and wide dynamic range provide resistance to same-frequency interference.

An IP67 dustproof, waterproof and corrosion-resistant design supports continuous outdoor operation in all weather. The ANT-M7 uses a Type-C interface and shares its design and firmware with the RTK base station, allowing role changes by loading different configuration parameters. Combined with the RTK F9P receiver, ANT-B10 base station antenna and PIX flight control series, it supports high-precision positioning within the mobile station communication range for agricultural machinery and drone applications. The antenna package contains one ANT-M7 and one ANT-M7 connection cable.

Flight control & navigation

Specifications

Radiolink ANT-M7 specifications
SpecificationValue & conditions
Product identityRadiolink ANT-M7 RTK rover antenna
Antenna constructionFour-feed, eight-arm passive antenna
Positioning and directional characteristicsLow axial ratio, small phase center offset, high positioning accuracy, high phase center stability, repeatability and directivity
Aircraft applicationSuitable for high-speed aircraft
Satellite receptionMulti-star reception with increased receiving area and height, improved low-elevation-angle gain and strong low-elevation-angle satellite tracking
Out-of-band filteringPre-SAF filter and two-stage surface acoustic wave filter for out-of-band interference suppression
In-band interference suppressionUltra-low noise coefficient, high-linearity LNA and wide dynamic range for same-frequency interference resistance
Environmental protectionIP67; dustproof, waterproof and corrosion-resistant design supporting all-weather continuous operation
Base station and rover switchingShared design and firmware support switching between base station and rover operationLoad different configuration parameters to switch between base station and rover operation.
InterfaceType-C interface
System applicationsHigh-precision positioning for agricultural machinery control and M435 Heavy Lift Drone applications, including agriculture, surveying and mapping, inspection, express delivery, takeout and rescue material deliveryRTK kit comprising RTK F9P receiver, ANT-B10 base station antenna and ANT-M7 rover antenna, combined with the PIX flight control series; positioning within the mobile station communication range.
Package contents1 × ANT-M7 RTK rover antenna; 1 × ANT-M7 connection cableANT-M7 antenna package.

Related guides