ChinaDroneRequest a quote →
Radiolink ANT-B10 RTK base station antenna with a white dome and orange rim, mounted on a support stand.Radiolink ANT-B10 RTK base station antenna with a white dome and orange rim, mounted on a support stand.

Radiolink ANT-B10

The Radiolink ANT-B10 is an RTK base station antenna for precision positioning systems. Its four-feed eight-pin construction combines low-elevation satellite tracking with ceramic filtering and time-delay compensation. Used with the RTK F9P, ANT-M7 and PIX flight controls, it supports agricultural machinery and drone applications. The antenna package includes a connection cable.

RadioLinkDrone flight controller
Applications
Radiolink automatic driving control system for agricultural machinery vehicles supporting 90-degree on-the-spot steering, and the M435 Heavy Lift Drone

Get a free quote

Product overview

The Radiolink ANT-B10 is an RTK base station antenna built around a four-feed eight-pin design. Its low axial ratio and small phase center offset support high positioning accuracy, while a stable, repeatable phase center supports accurate directivity. High gain at low elevation angles helps track low-elevation satellites. A ceramic filter and time-delay compensation circuit improve measurement timing, and front and two-stage ceramic filtering suppress out-of-band interference. An ultra-low noise coefficient, high-linearity LNA and wide dynamic range address same-frequency interference.

Combined with an RTK F9P receiver, ANT-M7 rover antenna and PIX flight controls, the ANT-B10 forms part of an RTK positioning system for agricultural machinery vehicles and the M435 Heavy Lift Drone. The system provides high-precision positioning within the mobile station’s communication range for agriculture, surveying and mapping, inspection, delivery and rescue material transport. The standard antenna package supplies one ANT-B10 and one ANT-B10 connection cable. Support rods and the base are purchased separately.

Flight control & navigation

Specifications

Radiolink ANT-B10 specifications
SpecificationValue & conditions
Product typeRadiolink ANT-B10 RTK base station antenna
Antenna constructionFour-feed eight-pin antenna design with low axial ratio, small phase center offset and high positioning accuracy
Phase center characteristicsHigh stability and good repeatability
Satellite receptionHigh gain and strong tracking capability for low-elevation satellitesAt low satellite elevation angles.
Measurement timing designCeramic filter and time-delay compensation circuit for accurate measurement timing and improved positioning accuracy
Out-of-band interference suppressionFront ceramic filter and two-stage ceramic filter design with high out-of-band suppression
In-band interference suppressionUltra-low noise coefficient, high-linearity LNA and wide dynamic range for suppression of same-frequency interference
ApplicationsRadiolink automatic driving control system for agricultural machinery vehicles supporting 90-degree on-the-spot steering, and the M435 Heavy Lift DroneIn an RTK kit with the RTK F9P receiver and ANT-M7 rover antenna, combined with PIX flight controls.
Positioning usesHigh-precision positioning for agriculture, surveying and mapping, inspection, express delivery, takeout and rescue material deliveryWithin the communication range of the mobile station, using the RTK kit combined with PIX flight controls.
Included equipment1 × ANT-B10 RTK base station antenna; 1 × ANT-B10 connection cableStandard ANT-B10 antenna package.
Excluded equipmentSupport rods and base are not included and are purchased separatelyStandard supply.

Related guides