ChinaDroneRequest a quote →
Moneypro M20KTIR Pro dual-sensor gimbal camera with black housing and two front lensesMoneypro M20KTIR Pro dual-sensor gimbal camera with black housing and two front lenses

Moneypro M20KTIR Pro

The Moneypro M20KTIR Pro is a dual-sensor, three-axis gyrostabilized camera for aerial surveillance, maritime observation and inspection. It combines a SONY 20x optical zoom EO camera with a high-resolution uncooled thermal imager, supports simultaneous picture-in-picture imaging, and includes mounting and damping hardware in a foam-cushioned plastic box.

MoneyProPayloads & thermal cameras
Input voltage
3S ~ 6S

Get a free quote

Product overview

The Moneypro M20KTIR Pro combines visible-light and thermal imaging in a stabilized gimbal payload for aerial surveillance, maritime observation and remote inspection. Its SONY 1/2.5″ Exmor R CMOS camera provides 8.51MP resolution, 4K video and 20x optical zoom. The thermal imager pairs a 35mm lens with a 1280×1024 uncooled detector, an 8μm–14μm spectral range and 12μm pixels. Visible and thermal images can be recorded and transmitted simultaneously in picture-in-picture format. An optional thermometry version supports three-point temperature measurement from 0°C to 120°C, with readings displayed on screen.

A dedicated processor controls the three-axis gimbal, with motor control accuracy of ±0.01°. The mechanically limited construction incorporates concealed wiring, four damping balls and a lightweight damping board. PWM and serial TTL control are supplied as standard, with SBUS available optionally; the IP output version adds TCP control over Ethernet and endless pan. The package includes one gimbal camera device, screws, copper cylinders, damping balls and damping boards, supplied in a plastic box with a foam cushion. The optional Moneypro Quick Release Connector Viewport provides plug-and-play assembly.

Mission payloads

Specifications

Moneypro M20KTIR Pro specifications
SpecificationValue & conditions
Working voltage12V
Input voltage3S ~ 6S
Output voltage5VConnected with PWM.
Dynamic current1250~1900mAAt 12V.
Idle current1250mAAt 12V.
Operating temperature-20°C ~ +60°C
Local storageSD card (Up to 128G, class 10, FAT32 or ex FAT format)
Photo storage formatJPG (4K:3840*2160)
Video storage formatMP4 (1080P/4K 30fps)
Control methodsPWM / SBUS / TTL / TCPPWM and TTL supplied by default; SBUS optional; TCP available for the IP output version via Ethernet.
Mechanical angular range
  • Pitch/Tilt: -60° to 135°;
  • Roll: ±50°;
  • Yaw/Pan: ±300° / ±360°*N (IP output version)
Endless pan applies to the IP output version.
Software angular rangePitch/Tilt: -45° to 90°; Yaw/Pan: ±290° / ±360°*N (IP output version)Endless pan applies to the IP output version.
Vibration anglePitch/Roll: ±0.02°; Yaw: ±0.02°
One-key centeringSupported
EO image sensorSONY 1/2.5″ “Exmor R” CMOS
EO pixel count8.51MP
Optical zoom and lens20x; F2.0 to F3.8; f = 4.4 mm (Wide), 88.4 mm (Tele)4.4 mm at the wide end; 88.4 mm at the telephoto end.
EO digital zoom12x (240x with optical zoom)240x when combined with optical zoom.
Minimum working distance80 mm (Wide end), 800 mm (Tele end)Wide and telephoto lens endpoints respectively.
EO horizontal angle of view70.2° (Wide end) ~ 4.1° (Tele end)Wide to telephoto lens endpoints.
EO signal-to-noise ratio50dB
Recommended illumination100 to 100000 lux
Electronic shutter speed1/1 to 1/10000 sec. (22 steps)
Noise reductionOn/Off (level 5 to 1/ Off, 6 steps)
Defog modeOn/Off (Low, Mid, High)
Focus modesAuto/Manual/One-time automatic focus
Thermal lens size35mmIR thermal imager.
Thermal horizontal field of view24.8°IR thermal imager.
Thermal vertical field of view19.9°IR thermal imager.
Thermal diagonal field of view31.4°IR thermal imager.

Related guides