ChinaDrone.Request a quote ↗
COMPONENT

Maytech MT35A-SBEC-FP32 Falcon Pro 32bit Firmware Brushless ESC

By Maytech ↗

The Maytech MT35A-SBEC-FP32 Falcon Pro is a compact 32bit brushless ESC for RC aircraft and other motor-control applications. It combines 35A continuous and 45A burst ratings, a 5.5V/4A BEC and 2-4-cell LiPo support, with programmable settings and motor-protection functions.

Request a quote ↗
Maytech MT35A-SBEC-FP32 Falcon Pro brushless ESC with black casing and attached wires
Maytech MT35A-SBEC-FP32 Falcon Pro brushless ESC with black casing and attached wires
Manufacturer and modelMaytech MT35A-SBEC-FP32 Falcon Pro 32bit Firmware Brushless ESC
ApplicationsAirplane/RC airplane/3D flying/RC hobby applications/sport flying/aggressive aerobatics/helicopter/racing airplane/ROV/ROVEEE/remote operated vehicle/underwater robot/underwater robotics/underwater remotely operated vehicles/subsea robots/cablecam/broadcast/IBC2019/Ultra drones, etc.
Controller architecture32bit MCU
FirmwareMaytech FP series firmware
Continuous current35A
Burst current45A

Product overview

The Maytech MT35A-SBEC-FP32 Falcon Pro is a brushless electronic speed controller intended especially for RC airplanes, with helicopter and drone applications also identified. It is a motor-control component for integration into a larger vehicle. Its architecture combines a 32bit MCU, Maytech FP series firmware and a separate MCU voltage-regulator IC. Control features include linear throttle response and low-speed operation, while the separate regulator supports resistance to interference. Listed applications also extend to remotely operated underwater vehicles and cablecam systems.

For installation planning, the ESC measures 36*23.5mm and has a net weight of 25g. Its electrical configuration provides a 35A continuous rating, 45A burst rating and 5.5V/4A BEC, with support for 2-4-cell LiPo batteries. Programming is available through Trx or an optional Maytech programming card. Motor direction can be changed through the card or by exchanging two motor wires. Low-voltage, blocked-rotation and signal-loss protections accompany startup inhibition when the battery is connected, regardless of throttle-stick position.

Specifications

SpecificationValue & conditions
Manufacturer and modelMaytech MT35A-SBEC-FP32 Falcon Pro 32bit Firmware Brushless ESC
ApplicationsAirplane/RC airplane/3D flying/RC hobby applications/sport flying/aggressive aerobatics/helicopter/racing airplane/ROV/ROVEEE/remote operated vehicle/underwater robot/underwater robotics/underwater remotely operated vehicles/subsea robots/cablecam/broadcast/IBC2019/Ultra drones, etc.
Controller architecture32bit MCU
FirmwareMaytech FP series firmware
Continuous current35A
Burst current45A
BEC5.5V/4A
Battery cell count2-4 cellsLiPo battery.
Net weight25g
Size36*23.5mm
MCU voltage regulationSeparate voltage regulator IC for the MCU, with interference resistance.
Protection functionsLow-voltage, blocked-rotation and signal-loss protection.
Programming methodsProgrammable by Trx or an optional Maytech programming card.Maytech programming card is optional.
Startup behaviorMotor startup is inhibited at battery connection.When the battery is connected, regardless of throttle-stick position.
Motor direction adjustmentExchange two of the three ESC wires or change the setting using the Program-Card.Direction adjustment by wiring or Program-Card.
Motor-control characteristicsStartup and low-speed operation, linear throttle control and quick throttle response.
SOURCE WITH CHINADRONE

Request a quote for Maytech MT35A-SBEC-FP32 Falcon Pro 32bit Firmware Brushless ESC

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
Flash Hobby MT4112 480KV brushless DC motor with silver housing and exposed copper windings.
Motors & ESCs

FlashHobby 4112 Brushless DC Motor

By FlashHobby

The FlashHobby 4112 Brushless DC Motor (MT4112) is a multirotor propulsion component recommended for 12–15-inch propeller applications. It weighs 151.0g including cables and offers 320KV, 400KV, 480KV or custom KV options. Its aluminum bell and copper winding accompany conflicting 24N22P and 12N14P configuration descriptions.

GEPRC TAKER F722 BT 32Bit 50A STACK flight controller and ESC assembly
Flight control & navigation

TAKER F722 BT 32Bit 50A STACK

By GEPRC

The GEPRC TAKER F722 BT 32Bit 50A STACK is a UAV electronics assembly pairing an F722 flight controller with a four-in-one 50A ESC. It supports 3–6S LiPo input and direct DJI Air Unit connection, and includes cables and mounting hardware. The current batch lacks Bluetooth wireless parameter tuning.