Product overview
The MAD V128 EVTOL UAV Drone Motor is a propulsion component for heavy-payload, long-endurance UAV applications, including surveying, logistics and agriculture. Its motor designation is MAD V128 IPE V2.0, with 50KV, 65KV and 45KV options and optional ENCR electronic control. The 1910g motor measures D:145 × 59 mm. Its construction incorporates an anticorrosive stator, 19 pole pairs, two 6904ZZ bearings and centrifugal heat dissipation. Protection is rated IP35, while the varnished wire and magnet temperature ratings are 220°C and 180°C respectively.
Mechanical integration uses D:50 M6×4 motor mounting holes, D:24 M4×4 and D:30 M5×4 propeller interfaces, and 150 mm extended enameled wires. Two 50KV solution configurations pair a Fluxer VTOL 40x13.1 or 42x14 propeller with a MAD AMPX 200A(12-24S) ESC. Both specify LiPo power at 24S(4.3V/S)/84-104V, thrust of 20kg ~ 27kg per motor, and an 80kg recommended four-axis takeoff weight. Maximum thrust is up to 62kg per rotor, with continuous thrust of 20-27kg. For coaxial configurations, a total thrust loss of 25% should be considered.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | MAD V128 EVTOL UAV Drone Motor; SKU 0101DJ1014 |
| Motor model | MAD V128 IPE V2.0 |
| Number of pole pairs | 19 |
| Stator | Anticorrosive |
| Varnished wire temperature rating | 220°C |
| Motor size | D:145 × 59 mm |
| Magnet temperature rating | 180°C |
| Degree of protection | IP35 |
| Cable length | 150 mm (extended enameled wires)Extended enameled wires. |
| Centrifugal heat dissipation | Yes |
| Rotor balance | ≤10 mg |
| Propeller mounting holes | D:24 M4×4, D:30 M5×4 |
| Motor balance | ≤20 mg |
| Shaft diameter | IN: 20 mm |
| Motor mounting holes | D:50 M6×4 |
| Bearing | 6904ZZ*2 |
| Disruptive test voltage | 500 V |
| KV options | 50KV, 65KV, 45KV |
| Motor weight | 1910g |
| Maximum thrust | Up to 62kgPer rotor. |
| Continuous thrust | 20-27kgPer rotor. |
| Electronic control option | ENCR (Electronic Control)Optional equipment. |
| Intended applications | Surveying, logistics, agriculture, and other heavy-payload, long-endurance UAV applications |
| Propeller and ESC combination 1 | Fluxer VTOL 40x13.1 propeller; MAD AMPX 200A(12-24S) ESCMAD V128 IPE 50KV solution. |
| Propeller and ESC combination 2 | Fluxer VTOL 42x14 propeller; MAD AMPX 200A(12-24S) ESCMAD V128 IPE 50KV solution. |
| LiPo battery and voltage | 24S(4.3V/S)/84-104VListed 50KV solutions with Fluxer VTOL 40x13.1 or 42x14 propeller and MAD AMPX 200A(12-24S) ESC. |
| Solution thrust per motor | 20kg ~ 27kgListed 50KV solutions; 24S(4.3V/S)/84-104V. |
| Recommended takeoff weight | 80kgFour-axis configuration using a listed 50KV solution; 24S(4.3V/S)/84-104V. |
| Total thrust loss allowance | 25% should be consideredCoaxial configuration. |
Request a quote for V128 EVTOL UAV Drone Motor
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
