Product overview
The MAD M60C60 PRO IPE is a manned-drone propulsion motor with a power output of 46 kW, equivalent to 62hp. Its 8.5KV configuration is designated MAD M60C60 IPE V1.0 and has 21 pole pairs. Mechanical integration uses a D:196.8 ×130 mm motor envelope, an IN: 25 mm shaft diameter and D:80 M6×6 motor mounting holes. The propeller interface offers D:75 M8×6 and D:50 M6*6 mounting patterns, with a 72x25-inch propeller recommended for the motor.
The motor combines an anticorrosive stator, centrifugal heat dissipation and IP45 protection. Varnished wire temperature is specified as 220°C and magnet temperature as 180°C. Its bearing arrangement uses two NSK 6205 ZZ bearings and one NSK 61822 ZZ bearing, while electrical connections use 150 mm extended enameled wires. Rotor balance is ≤20 mg, motor balance is ≤30 mg, and the disruptive test voltage is 2000 V. The M60C60 PRO IPE has been discontinued, with the upgraded AM90 8.5KV Motor recommended as its replacement.
Specifications
| Specification | Value & conditions |
|---|---|
| Product status | DiscontinuedStatus stated on the supplied product listing at retrieval. |
| Suggested replacement | AM90 8.5KV MotorThe listing recommends this upgraded motor to replace the discontinued item. |
| Product identity | MAD M60C60 PRO IPE Manned Drone Motor |
| Power output | 46 kW, equivalent to 62hp |
| Motor model | MAD M60C60 IPE V1.0 |
| Number of pole pairs | 21 |
| Stator | Anticorrosive |
| Varnished wire temperature | 220°C |
| Motor size | D:196.8 ×130 mm |
| Magnet temperature | 180°C |
| Degree of protection | IP45 |
| Cable length | 150 mmExtended enameled wires. |
| Centrifugal heat dissipation | YES |
| Rotor balance | ≤20 mg |
| Propeller mounting holes | D:75 M8×6 D:50 M6*6 |
| Motor balance | ≤30 mg |
| Shaft diameter | IN: 25 mm |
| Motor mounting holes | D:80 M6×6 |
| Bearings | NSK 6205 ZZ *2 NSK 61822 ZZ *1 |
| Disruptive test voltage | 2000 V |
| Recommended propeller | 72x25-inch propellerRecommended propeller configuration. |
| KV option | 8.5KV |
| Recommended replacement | AM90 8.5KV MotorReplacement for the discontinued M60C60 PRO IPE motor. |
Request a quote for MAD Components M60C60 PRO IPE Manned Drone Motor
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
