ChinaDrone.Request a quote ↗
COMPONENT

MAD Components 4112 PRO IPE V1.0 eVTOL Drone Motor

By MAD Components ↗

The 4112 PRO IPE is a drone motor designed for propeller feathering.

Request a quote ↗
ModelMAD 4112 PRO IPE V1.0Model identified in motor data.
Propeller match15-16 inch ultra-stiff carbon fiberMatching propeller range specified for the 4112 Pro IPE.
Automatic alignmentHorizontal relative to the wingDesigned behavior of the motor with propeller upon shutdown.

Product overview

When shut down, the motor and propeller are designed to return automatically to a horizontal position relative to the wing for streamlined alignment.

Ultra-stiff carbon-fiber propellers of 15-16 inches as the matching propeller range.

Specifications

SpecificationValue & conditions
ModelMAD 4112 PRO IPE V1.0Model identified in motor data.
Propeller match15-16 inch ultra-stiff carbon fiberMatching propeller range specified for the 4112 Pro IPE.
Automatic alignmentHorizontal relative to the wingDesigned behavior of the motor with propeller upon shutdown.
SOURCE WITH CHINADRONE

Request a quote for MAD Components 4112 PRO IPE V1.0 eVTOL Drone Motor

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
T-MOTOR U15L KV43 UAV motor with an attached propeller.
Motors & ESCs

T-MOTOR U15L KV43 UAV Motor

By T-MOTOR

The T-MOTOR U15L KV43 is a manned-aircraft-type UAV propulsion motor with 2800W rated power and stated maximum thrust of 63kg. Its 36N42P configuration, Φ151.5*86mm dimensions, 25mm shaft and 200mm lead define key integration details. Weight is 3600g including cable, and peak current is specified as 135A for 120 seconds.

T-MOTOR HEP-L 28*9 carbon-fiber multirotor propeller
Motors & ESCs

HEP-L 28*9

By T-MOTOR

The T-MOTOR HEP-L 28*9 is a carbon-fiber composite propeller for long-endurance multirotor UAVs. Its one-piece construction incorporates a PMI core, with an average individual weight of 59 g. A defined flange interface and recommended 12S motor combinations guide integration, while separate usual, recommended-maximum and limit specifications define its operating envelope.

HOBBYWING RTF 65A 4in1 6S Lite BLS V2 electronic speed controller board with blue mounting grommets.
Motors & ESCs

HOBBYWING RTF 65A 4in1 6S Lite BLS V2

By HOBBYWING

HOBBYWING’s RTF 65A 4in1 6S Lite BLS V2 is a four-channel brushless ESC for FPV aircraft integration. It specifies 65A continuous and up to 80A burst per channel on 4–6S LiPo. The 44 × 44 × 5.86mm component includes input wires, motor solder tabs and a separate capacitor, with configuration dependent on firmware.