Product overview
The Long UAV FC&ESC Stack F722 V3 BLS 100A combines flight control and electronic speed control hardware for UAV integration. The flight controller measures 39.8 × 38.7 × 8 mm and weighs 10 g; the ESC measures 58.5 × 32.6 × 4 mm and weighs 30 g. Both boards have a 30.5 × 30.5 mm mounting pattern with φ4 mm holes. The controller incorporates an STM32F722RET6 MCU, ICM42688P gyro, SPL06 barometer and 16 MB of storage.
Electrical integration provides six UART ports, SBUS on UART3, a DJI Air Unit 6-pin plug and external device plug support. Both boards accept 3–8S input, while BEC outputs are 5V / 3A and 12V / 2.5A. BetaFlight is the default controller firmware, with iNAV also supported. The BLHeli_S ESC has a 100 A continuous rating and 130 A maximum rating. Supplied installation equipment includes nylon nuts, shock absorbing balls, a 63V 1000µF capacitor, receiver and video cables, an 8-pin cable and an XT90 power cord.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | Long UAV FC&ESC Stack F722 V3 BLS 100A |
| Flight controller dimensions | 39.8 × 38.7 × 8 mm |
| Flight controller net weight | 10 gFlight controller only. |
| Mounting hole spacing and diameter | 30.5 × 30.5 mm, φ4 mmFlight controller and ESC. |
| MCU | STM32F722RET6 |
| IMU (gyro) | ICM42688P |
| Barometer | SPL06 |
| BEC output | 5V / 3A, 12V / 2.5A |
| Storage | 16 MB |
| Input voltage | 3–8SFlight controller and ESC. |
| Firmware target | GETFUN722V3 |
| UART serial ports | 6 |
| SBUS serial port | UART3 |
| Air Unit connector | DJI Air Unit 6-Pin |
| External device plug | Supported |
| Supported flight modes and flight controller firmware | BetaFlight (Default), iNAVBetaFlight is the default. |
| ESC dimensions | 58.5 × 32.6 × 4 mm |
| ESC net weight | 30 gESC only. |
| Continuous current | 100 A |
| Maximum current | 130 A |
| Current ratio | 100 |
| ESC firmware | BLHeli_S |
| Assistant software | BLHeliSuite 16.7.14.9.0.3 |
| Supported drive signals | PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600 |
| Mounting and power accessories | 4 × M3 nylon nuts; 1 × 63V 1000µF capacitor; 8 × M3 red shock absorbing ballsSupplied accessories. |
| Interconnect and power cables | 1 × 8-pin cable; 1 × CRSF receiver 4-pin cable; 1 × 4P-6P adapter cable; 1 × 4P to 6P VTX cable; 1 × camera 3-pin cable; 1 × XT90 power cordSupplied accessories. |
